model years

fatboy · 02-27-2017, 09:10 PM

looking at getting the wife a 250 and wonder if there is any differences in the years. other than little thing. i am looking at a 99 and a 06 is there any differences, if i was going to mod one is there a better year to get.

blaine · 02-27-2017, 09:13 PM

There was a head redesign in 05.....Other than that all years are pretty much the same.

fatboy · 02-27-2017, 09:15 PM

thanks
what about the specs. like seat height. (wife is short) frame width, rear swing arm, they look the same but that doesnt mean anything

Water Warrior 2 · 02-27-2017, 09:26 PM

I would opt for the newer bike. There may be minor changes over the years but my main concern would be age related problems with the older bike. More wear and tear over the years could have a cumlative effect on certain parts.
Think wheel bearings, cables, bushings, seals, degrading wire harness and general corrosion.
Either bike might likely need new tires. Good time to slip in new wheel bearings while the wheels are off. Ditto for rear brake shoe inspection too.

Keep us in the loop.

02-27-2017, 09:10 PM	#1
fatboy Junior Member Join Date: Feb 2017 Posts: 2	model years looking at getting the wife a 250 and wonder if there is any differences in the years. other than little thing. i am looking at a 99 and a 06 is there any differences, if i was going to mod one is there a better year to get. Login or Register to Remove Ads
	0

02-27-2017, 09:13 PM	#2
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	There was a head redesign in 05.....Other than that all years are pretty much the same. __________________ If at first you do succeed, try not to look surprised.
	0

02-27-2017, 09:15 PM	#3
fatboy Junior Member Join Date: Feb 2017 Posts: 2	thanks what about the specs. like seat height. (wife is short) frame width, rear swing arm, they look the same but that doesnt mean anything Login or Register to Remove Ads
	0

02-27-2017, 09:26 PM	#4
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	I would opt for the newer bike. There may be minor changes over the years but my main concern would be age related problems with the older bike. More wear and tear over the years could have a cumlative effect on certain parts. Think wheel bearings, cables, bushings, seals, degrading wire harness and general corrosion. Either bike might likely need new tires. Good time to slip in new wheel bearings while the wheels are off. Ditto for rear brake shoe inspection too. Keep us in the loop.
	0