Experimental Sight glass 14mm

se · 10-01-2016, 11:13 PM

I am experimenting with some sight glass and I think I got the right dimensions. So far the opening is about 14mm and I tried to see which sight glasses will work and not.

I will post some pictures 2morrow so people can critique and get feedback. I installed it in my gz250 and so far there is no leaks for the past 2 months.

I got 2 extra ones, so if you really, really, and I mean REALLY need a sight glass, and you don't have a working front brake, then just pm me with your address and I will sent one for free. just post your thoughts and tell me if it leaks oil or not.

This is experimental, so i assume no responsibilities. Its just a sight glass, 2 o-rings, and a thin nut.

sorry, i only got 2 and its for the people who want to try it out.

http://i1377.photobucket.com/albums/...psefbv97k4.jpg

Water Warrior 2 · 10-02-2016, 02:23 AM

Looks good.

se · 10-02-2016, 05:46 PM

here is what you will likely receive.

pIC

this pict is missing another o-ring, you will need 2 o-rings cuss the depth of the opening is a tad too big. I can't the other oring ,but I hope I have an extra lying around.

motorandy · 10-23-2016, 10:14 AM

Did you purchase this sight glass off of eBay?

I recently bought 2 from eBay but they don't have a nut to tighten them down. They only come with o-rings which I assumed will fit into some groove in the housing itself. Your post has prompted me to try and insert them today.

Thanks!

se · 11-02-2016, 09:54 PM

I purchase the this on AliExpress (china's amazon) and it was LOT 5 M27x1.5mm sight oil. You can buy this at ebay, but you spend like $1 more.

I recommend that you buy 2 o-rings, cuss the 1 o-ring is like 1mm too thin. It was leaking oil, so i added another o-ring to solve the problem. Now after like 4 months, it does not leak oil.

10-01-2016, 11:13 PM	#1
se Junior Member Join Date: Oct 2016 Posts: 3	Experimental Sight glass 14mm I am experimenting with some sight glass and I think I got the right dimensions. So far the opening is about 14mm and I tried to see which sight glasses will work and not. I will post some pictures 2morrow so people can critique and get feedback. I installed it in my gz250 and so far there is no leaks for the past 2 months. I got 2 extra ones, so if you really, really, and I mean REALLY need a sight glass, and you don't have a working front brake, then just pm me with your address and I will sent one for free. just post your thoughts and tell me if it leaks oil or not. This is experimental, so i assume no responsibilities. Its just a sight glass, 2 o-rings, and a thin nut. sorry, i only got 2 and its for the people who want to try it out. http://i1377.photobucket.com/albums/...psefbv97k4.jpg Login or Register to Remove Ads
	0

10-02-2016, 05:46 PM	#3
se Junior Member Join Date: Oct 2016 Posts: 3	here is what you will likely receive. pIC this pict is missing another o-ring, you will need 2 o-rings cuss the depth of the opening is a tad too big. I can't the other oring ,but I hope I have an extra lying around. Login or Register to Remove Ads
	0

11-02-2016, 09:54 PM	#5
se Junior Member Join Date: Oct 2016 Posts: 3	I purchase the this on AliExpress (china's amazon) and it was LOT 5 M27x1.5mm sight oil. You can buy this at ebay, but you spend like $1 more. I recommend that you buy 2 o-rings, cuss the 1 o-ring is like 1mm too thin. It was leaking oil, so i added another o-ring to solve the problem. Now after like 4 months, it does not leak oil. Login or Register to Remove Ads
	0

10-02-2016, 02:23 AM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Looks good.
	0

10-23-2016, 10:14 AM	#4
motorandy Junior Member Join Date: Oct 2016 Location: Phoenix, AZ Posts: 3	Did you purchase this sight glass off of eBay? I recently bought 2 from eBay but they don't have a nut to tighten them down. They only come with o-rings which I assumed will fit into some groove in the housing itself. Your post has prompted me to try and insert them today. Thanks!
	0