Clutch plates

gzhersh · 08-05-2015, 09:39 AM

When installing clutch plates
Do u have to soak the plates kit in oil bed I installing them and if so how long you soak them.

Also do I need to disconnect the clutch cable

uglyman04 · 10-19-2016, 03:00 PM

If you look for info on clutches on the net the general consensus is to soak the pads for at least 4 hours. I just changed mine (14,000 miles) and let them soak 48 hours in standard 30 weight. After a couple of days the clutch felt like brand new! I mean so smooth I wondered if it actually shifted. So yes, soak the pads. And no you don't have to disconnect the cable but you do need to adjust the actuator rod. The little screw on the end of the shaft in center of clutch basket.
Seat it and turn a quarter turn out.

08-05-2015, 09:39 AM	#1
gzhersh Junior Member Join Date: Jul 2015 Posts: 11	Clutch plates When installing clutch plates Do u have to soak the plates kit in oil bed I installing them and if so how long you soak them. Also do I need to disconnect the clutch cable Login or Register to Remove Ads
	0

10-19-2016, 03:00 PM	#2
uglyman04 Junior Member Join Date: Jun 2016 Posts: 1	re./ clutch plates If you look for info on clutches on the net the general consensus is to soak the pads for at least 4 hours. I just changed mine (14,000 miles) and let them soak 48 hours in standard 30 weight. After a couple of days the clutch felt like brand new! I mean so smooth I wondered if it actually shifted. So yes, soak the pads. And no you don't have to disconnect the cable but you do need to adjust the actuator rod. The little screw on the end of the shaft in center of clutch basket. Seat it and turn a quarter turn out.
	0