WTB: Jug and bottom end, ***Bought an engine instead***

jkilla71 · 03-01-2013, 10:17 AM

Do not need bottom end anymore

Hi,

I am looking for a complete bottom end and if the jug/cylinder is included that would be nice too.

I don't have a GZ250 but I am attempting to install a GZ250 4 valve into my TU250 2 valve.

I already have a good 4 valve head and the gz exhaust but at first it appeared that I could just change the head however the 4 valve head has 2 more bolts than the 2 valve.

This is just an experiment so I am only offering $150 delivered for the jug and bottom end but I will also pay the same $150 if I can pick it up with in a 100 miles radius of 18015. I almost had one for under $100 on ebay but I feel asleep and someone got it for .50 cents more than I bid. I am in no hurry because I know I will find one, I am not sure I want to give the effort and my plan is to try this winter 2013-2014.

Thanks in advance

Joel

jkilla71 · 03-09-2013, 06:56 PM

I would also do a even trade for my 1981 GN400 engine with carb and coil for a GZ250 complete bottomend

jkilla71 · 03-25-2013, 08:23 PM

I no longer need a bottom end, was able to get my hands on an engine.

Thanks

**jonathan180iq** · 03-26-2013, 09:53 AM

Glad you got it resolved.

03-01-2013, 10:17 AM	#1
jkilla71 Junior Member Join Date: Mar 2013 Location: Bethlehem PA Posts: 3	WTB: Jug and bottom end, *Bought an engine instead* Do not need bottom end anymore Hi, I am looking for a complete bottom end and if the jug/cylinder is included that would be nice too. I don't have a GZ250 but I am attempting to install a GZ250 4 valve into my TU250 2 valve. I already have a good 4 valve head and the gz exhaust but at first it appeared that I could just change the head however the 4 valve head has 2 more bolts than the 2 valve. This is just an experiment so I am only offering $150 delivered for the jug and bottom end but I will also pay the same $150 if I can pick it up with in a 100 miles radius of 18015. I almost had one for under $100 on ebay but I feel asleep and someone got it for .50 cents more than I bid. I am in no hurry because I know I will find one, I am not sure I want to give the effort and my plan is to try this winter 2013-2014. Thanks in advance Joel __________________ Login or Register to Remove Ads
	0

03-09-2013, 06:56 PM	#2
jkilla71 Junior Member Join Date: Mar 2013 Location: Bethlehem PA Posts: 3	Re: WTB: Jug and bottom end I would also do a even trade for my 1981 GN400 engine with carb and coil for a GZ250 complete bottomend __________________
	0

03-25-2013, 08:23 PM	#3
jkilla71 Junior Member Join Date: Mar 2013 Location: Bethlehem PA Posts: 3	Re: WTB: Jug and bottom end I no longer need a bottom end, was able to get my hands on an engine. Thanks __________________ Login or Register to Remove Ads
	0

03-26-2013, 09:53 AM	#4
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: WTB: Jug and bottom end, *Bought an engine instead* Glad you got it resolved.
	0