![]() |
#1 |
Junior Member
Join Date: May 2012
Location: Tallahassee
Posts: 6
|
Seat replacement and passenger pegs.
I want to put cafe style seat with a place for a passenger on my GZ.if not a cafe than at least a thinner one piece seat. As it is right now the frame has been cut and rewelded with an extension that is flat but I still have the factory single seat. Anyone know of any seats that will fit my current layout? should I just start off with a custom seatpan and go from there? Also trying to find out the diameter of the tube part of the frame because I want to attach clamp on passenger pegs. I think its 1" but its a pain to measure and wanted to know if anyone has done this before.
![]() Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: Seat replacement and passenger pegs.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Re: Seat replacement and passenger pegs.
I agree. I've had mine over 40 years, and I still find that it's one of my most used tools. Everything from internal & external diameters to hole depths. It's also handy for finding the diameter of drill bits when the size marking has worn off. :2tup:
__________________
By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: May 2012
Location: Tallahassee
Posts: 6
|
Re: Seat replacement and passenger pegs.
so purchased 1"-1.25" bolt on passenger pegs (for highway bars) and purchased myself a drill and rivet gun for veterans day and made myself a passenger seat with marine grade vinyl and outdoor furniture foam and a few rivets. going to need some help doing fiberglass work to make the rear cowl and repair the tank but totally different post.
http://instagram.com/p/R-WZ2GiQ5w/ |
![]() |
![]() |
![]() |
|
|