Engine sprocket bolt - Page 2

alantf · 11-16-2012, 12:47 PM

Quote:

Originally Posted by schooler94

Haha I just grab whatever fits

Well........Imperial WON'T fit.

schooler94 · 11-16-2012, 02:41 PM

I got the engine out! Now I have another problem... I have all the screws out to pull the cylinder head cover off, but there's some blue crap the mechanic put on most likely to seal it... and I can't get the cover off

Road_Clam · 11-16-2012, 02:56 PM

Quote:

Originally Posted by schooler94

I got the engine out! Now I have another problem... I have all the screws out to pull the cylinder head cover off, but there's some blue crap the mechanic put on most likely to seal it... and I can't get the cover off

It's a very tight fit using dowel pins. Use a plastic mallet or a wood block and give the cover a few raps with a hammer slightly upwards it will break free. Be absolutely sure you have all the cover bolts removed or you will break the cover !

schooler94 · 11-16-2012, 03:14 PM

Alright thanks, I'll give it a shot

schooler94 · 11-16-2012, 03:23 PM

It's not working

I'm smashing this thing with a rubber mallet and all it's doing is chipping little pieces of rubber off the mallet

11-16-2012, 02:41 PM	#12
schooler94 Member Join Date: Oct 2012 Location: California Posts: 70	Re: Engine sprocket bolt I got the engine out! Now I have another problem... I have all the screws out to pull the cylinder head cover off, but there's some blue crap the mechanic put on most likely to seal it... and I can't get the cover off
	0

11-16-2012, 03:14 PM	#14
schooler94 Member Join Date: Oct 2012 Location: California Posts: 70	Re: Engine sprocket bolt Alright thanks, I'll give it a shot
	0

11-16-2012, 03:23 PM	#15
schooler94 Member Join Date: Oct 2012 Location: California Posts: 70	Re: Engine sprocket bolt It's not working I'm smashing this thing with a rubber mallet and all it's doing is chipping little pieces of rubber off the mallet Login or Register to Remove Ads
	0