Accelerating- something slipping or rough rider

buud · 12-04-2011, 11:17 PM

Hello folks,
Noticed that I get a lot of noise and vibration at times when I "over" accelerate in lower gears which, as a newbie, could be more often than I plan. I wonder if my clutch is slipping or chain doing something. Question: when goosed, will the GZ250 do a wheelie?

My intent after mc school has been to get smooth in shifting and take off, etc. but the learning process has had its spikes... with 1000+ miles I now am confident in the shifting, acceleration and braking. Now turning corners in traffic is the last bastion for me. Have wondered about the "slippage" though.

3,800 miles on a 2007 bike using Rotella T oil. The clutch release was adjusted for "travel" by a mechanic when I first got the bike at 2,480 miles and I changed the oil then too. Clutch engages at about the last inch of release travel and have had no problems with using the gears or anything.

I'm just not sure if this is normal, if I'm horsing the bike too much or should I have the clutch checked for slippage. The chain is definitely on the "loose side" but I don't know if this would cause "slippage".
Thanks and I'm looking forward to spring.

JWR · 12-04-2011, 11:36 PM

Adjust chain. I don't think it is slipping, it just has to take up the slack.
Roll on then roll off the throttle and the extra slack plays hell with smoothness.

Gz Rider · 12-05-2011, 12:06 AM

...

buud · 12-07-2011, 07:09 PM

Thank you, I will get the chain adjusted.

12-04-2011, 11:17 PM	#1
buud Junior Member Join Date: Sep 2011 Location: Chicago, Illlinois Posts: 24	Accelerating- something slipping or rough rider Hello folks, Noticed that I get a lot of noise and vibration at times when I "over" accelerate in lower gears which, as a newbie, could be more often than I plan. I wonder if my clutch is slipping or chain doing something. Question: when goosed, will the GZ250 do a wheelie? My intent after mc school has been to get smooth in shifting and take off, etc. but the learning process has had its spikes... with 1000+ miles I now am confident in the shifting, acceleration and braking. Now turning corners in traffic is the last bastion for me. Have wondered about the "slippage" though. 3,800 miles on a 2007 bike using Rotella T oil. The clutch release was adjusted for "travel" by a mechanic when I first got the bike at 2,480 miles and I changed the oil then too. Clutch engages at about the last inch of release travel and have had no problems with using the gears or anything. I'm just not sure if this is normal, if I'm horsing the bike too much or should I have the clutch checked for slippage. The chain is definitely on the "loose side" but I don't know if this would cause "slippage". Thanks and I'm looking forward to spring. Login or Register to Remove Ads
	0

12-04-2011, 11:36 PM	#2
JWR Senior Member Join Date: Jan 2009 Location: Louisville, TN Posts: 1,413	Re: Accelerating- something slipping or rough rider Adjust chain. I don't think it is slipping, it just has to take up the slack. Roll on then roll off the throttle and the extra slack plays hell with smoothness. __________________ Jerry Truth is there are lots of great bikes available and not nearly as many good riders out there riding them... "A man's got to know his limitations..."
	0

12-05-2011, 12:06 AM	#3
Gz Rider Senior Member Join Date: Aug 2011 Posts: 852	Re: Accelerating- something slipping or rough rider ... __________________ *Alert - This person is a douche. Use these comments and advice at your own risk* Login or Register to Remove Ads
	0

12-07-2011, 07:09 PM	#4
buud Junior Member Join Date: Sep 2011 Location: Chicago, Illlinois Posts: 24	Re: Accelerating- something slipping or rough rider Thank you, I will get the chain adjusted.
	0