Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Performance

Reply
 
Thread Tools Display Modes
Old 07-23-2010, 12:35 PM   #1
qwadfather
Junior Member
 
Join Date: Jun 2010
Location: Las Cruces, NM
Posts: 7
16 tooth

What a difference. Just when I thought i knew everything, you guys come along and school me, lol! Installed 16t this morning and took a little ride. Wow. Let's say this...It achieved all that I hoped and more. The bike is actually my wife's who is a brand new rider. I wanted to tame the jerkiness typically found in smaller displacement bikes that's caused by the effect of engine braking and overtorque on takeoff in lower gears. You know the jerking when you get into and let off the throttle in lower (especially 1st) gears. Mission accomplished! Smoother takeoffs and stopping, therefore safer for my new rider. The second objective was to get a little more comfortable hiway speed out of her. There you have it! One fellow on here described it as "6th" gear. I felt that way too. Not only 6 gears cruising but the 16t opened up the gear ratios between gears to where they should have been in the first place. I guess you could say highly pleased is an understatement. So, thank you guys out ther for the great info. I'll look forward to more tips! I'm also going to post a tip of my own about some updated PEGS later. See you al and ride safe from the Qwadfather and crew!
__________________
Lucky 7 Racing
Qwadwheeler@yahoo.com
"Don't do nothin' half-fast!"



Login or Register to Remove Ads
qwadfather is offline  
Reply With Quote
Old 07-23-2010, 01:46 PM   #2
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: 16 tooth

Quote:
Originally Posted by qwadfather
The second objective was to get a little more comfortable hiway speed out of her. There you have it!
It appears that you have done your "homework" so you probably already know this but it bears repeating anyway:

With the higher final drive ratio like that, you run out of raw horsepower in top gear and won't be able to achieve as high a top speed as before. That pretty much takes you OFF the Interstates......except for places where the traffic pace is ~ 60 mph or less. You can nurse it up to about 70 on the flat but hills and headwinds will KILL your speed......and make you a hazzard.

Same goes for carrying a load/passenger.

The plus side of that is that you can now maintain ~ 50 mph in 4th with no problem.....like steep hills or BAD headwinds.
__________________
Loud pipes risk rights!
Easy Rider is offline  
Reply With Quote
Old 07-23-2010, 02:06 PM   #3
qwadfather
Junior Member
 
Join Date: Jun 2010
Location: Las Cruces, NM
Posts: 7
Re: 16 tooth

So your saying that as an added bonus i get a built in speed limiter? Yippeee! Hmm? Wonder how much I can slow her down with a big 'ol windshield and some bags, lol! But seriously, I guess I didn't mean "real" hiway speeds. It will probably be years (?) before she has the confidence to venture onto anything more than the hundreds of backcountry roads here in NM. anybody know where Radiator Springs is? (Right now she's just learning to start up and slow down/stop. Can U say absolute beginner, LOL!) By then she'll probably want to graduate to something bigger anyway. Hell, We are both a hazard to all who drive because we just putter around (two-up on the Honda) everywhere we go anyway, actually avoiding the interstate whenever possible. No hurry, no worry. I learned a long time ago to get up a little earlier to get there on time, lol! Thanks for the advise and ride safe, Ed.
__________________
Lucky 7 Racing
Qwadwheeler@yahoo.com
"Don't do nothin' half-fast!"



Login or Register to Remove Ads
qwadfather is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:30 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.