06-01-2010, 10:47 AM
|
#1 |
|
Junior Member
Join Date: May 2010
Location: Potomac Falls VA
Posts: 5
|
2009 TU250X Valve Clearance Spec
Intake: 0.03 - 0.08 mm (0.001 - 0.003 in)
Exhaust: 0.08 - 0.13 mm (0.003 - 0.005 in) Clearances measured on a cold engine Adjusting screw locknut torque: 11.0 ft-lb Login or Register to Remove Ads |
|
|
|
06-01-2010, 11:18 AM
|
#2 | |
|
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: 2009 TU250X Valve Clearance Spec
Quote:
__________________
If at first you do succeed, try not to look surprised. 
|
|
|
|
|
 |
|
|
Linear Mode
