slight leak by gear shift

bobbybucs · 03-12-2021, 12:21 AM

Have 2001 with 10+k miles. Notice a slight leak that we think may be from around the gear shift shaft. Have looked up the seal and see that it is around 5 bucks. Anybody got an idea how hard it is to change? Can I just take the Gear Shift Arm Link off and get to the seal, pull, reinsert and done or is there more to it? Does the Engine Sprocket Cover need to come off?

Think this is the only leak we have.

Thanks for any help.

Vegas Street Rider · 03-16-2021, 08:38 PM

Sorry no one is stepping up to answer your question. I try not to respond to things I am not sure of. If you have a dealership nearby, you swing by and ask. I have done that on a few things with my '09 and then I knew what to expect.

Good luck and safe riding.

Stilkikn · 03-19-2021, 12:37 PM

Appears that most of GZ gurus have moved on. I've only had mine for a few weeks and have not changed any seals on the GZ so can only offer my opinion for whatever that's worth. First things first, are you sure that the oil you're seeing isn't oil dripping off the chain? Pretty important to positively identify oil leaks before diving in.

It looks to me like all you'd have to do to change that seal is remove your shift lever and maybe the linkage bar and then the seal would be easily accessed and changed. As far as removing the engine sprocket cover I don't think that would be necessary but might give you a little more working space. But it's only three bolts to remove it and only takes a minute or two so why not remove it and that way take a look at the condition of your sprocket at the same time. Apply some grease to the lips of the seal before installing.

Donald McPherson · 03-21-2021, 08:44 AM

I did a quick Google and found this easy fix.

03-12-2021, 12:21 AM	#1
bobbybucs Junior Member Join Date: Mar 2021 Location: Kansas Posts: 1	slight leak by gear shift Have 2001 with 10+k miles. Notice a slight leak that we think may be from around the gear shift shaft. Have looked up the seal and see that it is around 5 bucks. Anybody got an idea how hard it is to change? Can I just take the Gear Shift Arm Link off and get to the seal, pull, reinsert and done or is there more to it? Does the Engine Sprocket Cover need to come off? Think this is the only leak we have. Thanks for any help. Login or Register to Remove Ads
	0

03-19-2021, 12:37 PM	#3
Stilkikn Junior Member Join Date: Jan 2021 Posts: 17	Appears that most of GZ gurus have moved on. I've only had mine for a few weeks and have not changed any seals on the GZ so can only offer my opinion for whatever that's worth. First things first, are you sure that the oil you're seeing isn't oil dripping off the chain? Pretty important to positively identify oil leaks before diving in. It looks to me like all you'd have to do to change that seal is remove your shift lever and maybe the linkage bar and then the seal would be easily accessed and changed. As far as removing the engine sprocket cover I don't think that would be necessary but might give you a little more working space. But it's only three bolts to remove it and only takes a minute or two so why not remove it and that way take a look at the condition of your sprocket at the same time. Apply some grease to the lips of the seal before installing. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-16-2021, 08:38 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	Sorry no one is stepping up to answer your question. I try not to respond to things I am not sure of. If you have a dealership nearby, you swing by and ask. I have done that on a few things with my '09 and then I knew what to expect. Good luck and safe riding.
	0

03-21-2021, 08:44 AM	#4
Donald McPherson Member Join Date: Aug 2018 Location: Aberdeen Scotland Posts: 47	I did a quick Google and found this easy fix.
	0