HZ won't go into high rp. it Boggs down

miller.connor25 · 08-26-2018, 02:16 PM

just got the back tire replaced and when I got it back it wouldn't start come to find out there was take on the air filter under the seat and like a part of a screen window covering it and now sometimes it won't start but it also won't go above 50 pleas help

Sent from my SAMSUNG-SM-G891A using Tapatalk

Vegas Street Rider · 08-26-2018, 05:24 PM

Please clarify. Was there tape on the filter holding window screen material around it? If that is correct, I am guessing the air flow to the carburetor is not adequate. Put a stock air filter on it and it should help solve the problem. Was this set up on the bike before you took it in to have the new tire mounted? The fuel and air mixture is critical to get peak performance out of the carburetor. If either one is modified, the bike will not run correctly unless you change the orifice sizes in the carburetor.

08-26-2018, 02:16 PM	#1
miller.connor25 Member Join Date: Jul 2018 Location: broken arrow oklahoma Posts: 39	HZ won't go into high rp. it Boggs down just got the back tire replaced and when I got it back it wouldn't start come to find out there was take on the air filter under the seat and like a part of a screen window covering it and now sometimes it won't start but it also won't go above 50 pleas help Sent from my SAMSUNG-SM-G891A using Tapatalk Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-26-2018, 05:24 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	Please clarify. Was there tape on the filter holding window screen material around it? If that is correct, I am guessing the air flow to the carburetor is not adequate. Put a stock air filter on it and it should help solve the problem. Was this set up on the bike before you took it in to have the new tire mounted? The fuel and air mixture is critical to get peak performance out of the carburetor. If either one is modified, the bike will not run correctly unless you change the orifice sizes in the carburetor.
	0