Shift lever clearance

Gzetero · 05-15-2017, 07:00 PM

Dear all,

The shift lever on my GZ250 has a lot of movement to the sides (please see picture), it makes it uncomfortable to shift gears sometimes.

There is a noticeable clearance between the lever and the support (attached picture) and I cannot see any way to thighten it in order to diminish the clearance and movement.

Is there a way to fix this or any suggestion on how I can fix it.

Any help will be appreciated.

Thanks.

Water Warrior 2 · 05-15-2017, 08:20 PM

You might be able to use a very thin washer or spacer but personally I would not bother. It won't fall off. You could just ignore it. The small clearance that makes it a bit sloppy is common on some machines. Enjoy your ride and don't sweat the petty things.

blaine · 05-15-2017, 09:21 PM

Me being OCD know exactly what you mean.....AS WW stated a thin washer will take up the slack.

05-15-2017, 09:21 PM	#3
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Me being OCD know exactly what you mean.....AS WW stated a thin washer will take up the slack. __________________ If at first you do succeed, try not to look surprised. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-15-2017, 08:20 PM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	You might be able to use a very thin washer or spacer but personally I would not bother. It won't fall off. You could just ignore it. The small clearance that makes it a bit sloppy is common on some machines. Enjoy your ride and don't sweat the petty things.
	0