Well, she finally puked her guts out.... (pic)

spldart · 03-08-2017, 12:59 PM

Coming up the freeway and I started hearing bad sounds.
I pull off and i find me and the bike are soaked in oil and smoke is huffing out
the side with each revolution of the motor.
Something let go...

Remember that piston, cylinder, rings, pin, gasket set I bought a long time ago
but never installed....
Welp. If the head is intact then I'm about to install it

Vegas Street Rider · 03-08-2017, 05:22 PM

You didn't have anything better to do anyway, right Spldart? Hope you take lots of pictures to share with everyone as your project child progresses. Here's to everything going smoothly for you. Good luck!

Water Warrior 2 · 03-08-2017, 07:34 PM

Looks like a serious imitation of an old H-D.

Count your blessings, it might have just seized up on the move and locked the rear wheel. You don't want that no matter what. Luckily you had a warning sound to alert you of a serious problem.

Tear it down and look inside. Take pics etc. Your previous parts purchase was money well spent by the looks of it.

spldart · 03-09-2017, 03:14 PM

Quote:

Originally Posted by Water Warrior 2

Looks like a serious imitation of an old H-D.

Count your blessings, it might have just seized up on the move and locked the rear wheel. You don't want that no matter what. Luckily you had a warning sound to alert you of a serious problem.

Tear it down and look inside. Take pics etc. Your previous parts purchase was money well spent by the looks of it.

Lawlz the first line.

I know the second line.

I really hope your right the third line.

Miss my ride already.

And yes! Lotsa pics..

spldart · 03-09-2017, 03:16 PM

Quote:

Originally Posted by Vegas Street Rider

You didn't have anything better to do anyway, right Spldart? Hope you take lots of pictures to share with everyone as your project child progresses. Here's to everything going smoothly for you. Good luck!

OMG I wish!!!

This was the worst possible moment imaginable.

Lots of pics coming.

Appreciate the well wishes

spldart · 03-09-2017, 07:55 PM

I'm committed:

Found three problems so far but nothing that new gaskets, seals and some silicone
wont fix.
New piston, rings and cylinder 'SHOULD' bring compression back to normal.

Vegas Street Rider · 03-09-2017, 11:03 PM

We will hope for the best for you. The power of positive thinking is underrated. Here is to smooth sailing on this project.

spldart · 03-12-2017, 11:10 PM

spldart · 03-12-2017, 11:17 PM

spldart · 03-12-2017, 11:32 PM

03-08-2017, 07:34 PM	#3
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Looks like a serious imitation of an old H-D. Count your blessings, it might have just seized up on the move and locked the rear wheel. You don't want that no matter what. Luckily you had a warning sound to alert you of a serious problem. Tear it down and look inside. Take pics etc. Your previous parts purchase was money well spent by the looks of it. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-08-2017, 05:22 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	You didn't have anything better to do anyway, right Spldart? Hope you take lots of pictures to share with everyone as your project child progresses. Here's to everything going smoothly for you. Good luck!
	0

03-09-2017, 11:03 PM	#7
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	We will hope for the best for you. The power of positive thinking is underrated. Here is to smooth sailing on this project.
	0