Go Back   GZ 250 Forums > GZ250-Specific > Instructional Articles

Reply
 
Thread Tools Display Modes
Old 05-21-2014, 02:45 AM   #1
Cathy
Senior Member
 
Cathy's Avatar
 
Join Date: Nov 2013
Location: Vancouver BC
Posts: 157
Charge devices on your bike for under $5

Hello everyone,

Here is my how-to on making your bike capable of charging your devices for under $5 a.k.a Phones, GPS, i-Products. ect..
Extra: Feel free to add a in-line fuse if you like to.

Here is what I started off with but as you can see I bought a Y-connector $2.99 and if you already have connectors you are set. I went a little over kill because I thought I would have to solder and use shrink wrap but that was not the case.
-----


This is my random shopping list, some random stuff I did not have on me so I had to purchase some new supplies for the garage. I would expect the bike lovers here to have some tools.
-----


Here we go, SNIP!
-----


Press my connectors.
-----


All connected!
-----


It lives !
-----

-----


Slide it out a little bit so you don't drain your battery.
-----




Thanks for looking !



Login or Register to Remove Ads

Last edited by Cathy; 05-21-2014 at 03:47 AM.
Cathy is offline  
Reply With Quote
Old 05-21-2014, 03:08 AM   #2
Cathy
Senior Member
 
Cathy's Avatar
 
Join Date: Nov 2013
Location: Vancouver BC
Posts: 157
On the CBR. :concentrate:
-----

Thread through the fairing and waa-laa!
-----
Cathy is offline  
Reply With Quote
Old 05-21-2014, 05:21 PM   #3
gz4me +
Senior Member
 
gz4me +'s Avatar
 
Join Date: Sep 2013
Location: Santa Maria, California
Posts: 234
Charge devices on your bike

You did a very nice job. Pictures were helpful. Thanks



Login or Register to Remove Ads
gz4me + is offline  
Reply With Quote
Old 05-22-2014, 12:21 AM   #4
Cathy
Senior Member
 
Cathy's Avatar
 
Join Date: Nov 2013
Location: Vancouver BC
Posts: 157
I want to see pictures of anyone else's charging set up if this thread helped you !
Cathy is offline  
Reply With Quote
Old 05-22-2014, 04:55 PM   #5
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Can't seem to access my pics but I did put a water proof power point on the handle bars of our bikes to power a GPS or other items. I also had a battery monitor that was nicely visible when plugged in to the power point. Kinda handy when running a bunch of driving lights and heated gear.
The power point and added items were fused and set up through a separate fuse panel hidden out of the way and out of the elements. This was on the Vstrom and Suzuki M-50. The GZ only had an extra light on the front for more visibility in oncoming traffic. Lynda didn't want me messing too much with her baby(first bike) and I left it alone.
Her M-50 had a To Do List that read like a book. It was an interesting couple months to assemble all the bits and pieces before the actual installlation process. So here I go straying from the actual subject at hand but Electrical add-ons are not that hard to do with some thought and preplanning.
A charging line for smaller items is simple as Cathy has shown. Thank you Cathy for the How To and the pics.



Login or Register to Remove Ads
Water Warrior 2 is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:04 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.