![]() |
#1 |
Junior Member
Join Date: Dec 2013
Posts: 12
|
Tool Box Battery Tray Relocation....Enjoy
Remove tray bracket.
Trim what's needed. Place here. ------------------------------------------------ ------------------------------------------------ ![]() ![]() Put a bolt through this eye. ![]() ------------------------------------------------ ------------------------------------------------ Next, re-run wiring harness. Get creative. ------------------------------------------------ ------------------------------------------------ ![]() ![]() ------------------------------------------------ ------------------------------------------------ End result. Run ground along the bottom. Almost meant to be. ------------------------------------------------ ------------------------------------------------ ![]() Took me about an hour or so. Not to complicated. Seat still fits with no problems. All the tabs for the side cover have been cut off. Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2013
Location: manning, sc
Posts: 484
|
you did a good job. now are you gonna do anything with the extra space?
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Dec 2013
Posts: 12
|
the rectifier is mounted on the front side. i just have it showing in the picture. the extra space is really just open space. i really want to cafe style or bob style this bike.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|