08-11-2007, 04:14 PM | #1 |
Senior Member
Join Date: Jan 2007
Posts: 184
|
Front wheel
Hey guys,
what tool do you use to remove the front wheel? I think I need to replace the front disk pads and I know I dont have the correct tool so I will have to purchase one. Also, Isnt there supposed to be a mark to let us know when the pad is worn down? I look but cant see what the manual refers to. Does anyone have a picture of the front disk pads and what the wear mark is supposed to look like. Thanks. Login or Register to Remove Ads |
|
08-11-2007, 06:44 PM | #2 |
Member
Join Date: Aug 2006
Location: Illinois
Posts: 93
|
In the service manual on page 2-13 there is a drawing which shows the location of the wear mark on the front pads. You don't have to remove the front
wheel to change the pads either. It is a very easy job. Page 5-8 in the service manual shows you how to remove your caliper and pads. The service manual can be downloaded in the General Maintenance section of this site. Good luck.
__________________
Ride like you're invisible, not invincible. |
|
Thread Tools | |
Display Modes | |
|
|