Voltage Monitor

Water Warrior 2 · 12-09-2010, 02:03 AM

A couple weeks ago I fortunately found what I have wanted for some time now. The local Wally World had a Schumacher voltage monitor that plugs into a power point. Easily transferable from either bike or cages. Comes with a piece of 2 sided tape but I will probably use sticky backed velcro so it won't be a hassle moving it around.
Some pics to show the unit in action plugged into the Vstrom.

burkbuilds · 12-09-2010, 04:15 AM

Hey that's pretty cool. What did that puppy cost?

Water Warrior 2 · 12-09-2010, 07:43 AM

It was about $20 Can. so you can figure a better price south of the border. I was debating a permanent mounting on the bike with it wired into the ignition switch. Might be feasible if it was painted with clear nail polish to seal and waterproof the seams of the unit. Wouldn't take a lot to do it right for a permanent mount.
Think I'll Goggle these guys and see what other toys they have.

zenbutcher · 12-22-2010, 03:53 PM

did you just wire it straight to the battery, or what? I'm a terrible electrician.

alantf · 12-22-2010, 05:12 PM

Quote:

Originally Posted by zenbutcher

did you just wire it straight to the battery, or what? I'm a terrible electrician.

ANYTHING can be wired straight to the battery. Just don't forget to fit an INLINE FUSE. :2tup:

Water Warrior 2 · 12-22-2010, 05:31 PM

I just plug it into a power point on the bike. That way it can be used on either bike or a cage. Actually looked for the actual price and it was $18 without tax. Not bad for a portable set-up or a permanent set-up if desired. When I get ambitious I will compare the voltage reading with my meter hooked directly to the battery. Not anticipating any voltage drop through the power point wiring that would be of major concern.

12-09-2010, 02:03 AM	#1
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Voltage Monitor A couple weeks ago I fortunately found what I have wanted for some time now. The local Wally World had a Schumacher voltage monitor that plugs into a power point. Easily transferable from either bike or cages. Comes with a piece of 2 sided tape but I will probably use sticky backed velcro so it won't be a hassle moving it around. Some pics to show the unit in action plugged into the Vstrom. Login or Register to Remove Ads
	0

12-09-2010, 04:15 AM	#2
burkbuilds Senior Member Join Date: Mar 2009 Location: Shannon, Georgia Posts: 1,268	Re: Voltage Monitor Hey that's pretty cool. What did that puppy cost?
	0

12-09-2010, 07:43 AM	#3
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Voltage Monitor It was about $20 Can. so you can figure a better price south of the border. I was debating a permanent mounting on the bike with it wired into the ignition switch. Might be feasible if it was painted with clear nail polish to seal and waterproof the seams of the unit. Wouldn't take a lot to do it right for a permanent mount. Think I'll Goggle these guys and see what other toys they have. Login or Register to Remove Ads
	0

12-22-2010, 03:53 PM	#4
zenbutcher Member Join Date: Mar 2010 Location: Chattanooga, TN Posts: 57	Re: Voltage Monitor did you just wire it straight to the battery, or what? I'm a terrible electrician.
	0

12-22-2010, 05:31 PM	#6
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Voltage Monitor I just plug it into a power point on the bike. That way it can be used on either bike or a cage. Actually looked for the actual price and it was $18 without tax. Not bad for a portable set-up or a permanent set-up if desired. When I get ambitious I will compare the voltage reading with my meter hooked directly to the battery. Not anticipating any voltage drop through the power point wiring that would be of major concern.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode