04-07-2010, 02:02 AM | #1 |
Junior Member
Join Date: Apr 2010
Location: virginia
Posts: 1
|
Cannot unscrew oil filler cap!
Hi All-
I've been on this forum before but had to start a new name, couldn't remember the old one! Anyway- I was unwinterizing the bike today and attempting a simple oil and filter change- but can't even get the darn oil filler cap to unscrew!! I even used a big pair of pliers over a towel, and even that scratched the metal, without the cap budging a bit. I also tried lubing where the cap meets the case, and tapping (the same trick used for cars), but I think the seal is so tight that no lube got into the threading. Is there a trick I'm missing? Is it not "righty-tighty, leftie loosie" like everything else on the bike? I have a shop appt tomorrow but the bike is currently 30 miles from the shop... I got her running but the oil is very low and am not comfortable taking her on the highway without at least adding some oil or doing the full change. Any help or tips are appreciated! Login or Register to Remove Ads |
|
04-07-2010, 06:05 AM | #2 |
Senior Member
Join Date: Jul 2008
Location: Anaheim, CA
Posts: 2,926
|
Re: Cannot unscrew oil filler cap!
Try slipping a longish pipe over an adjustable crescent wrench (you can still do the towel thing to avoid scratches.) I suspect the thing wasn't properly threaded or someone got a little crazy and torqued it down.
Should be lefty (counter clockwise) if I remember correctly. With the long pipe you can apply a tremendous amount of force but in a very controlled increment. Much easier on the knuckles if it slips.
__________________
[hr:5yt6ldkq][/hr:5yt6ldkq] http://alanmarkcorcoran.com Motorcycles, Music, Musings and Moreā¦ |
|
04-07-2010, 11:34 AM | #3 | |
Senior Member
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
|
Re: Cannot unscrew oil filler cap!
Quote:
HOW low is the oil ? If you can still see it in the window when the bike is level, you should be OK; just don't make any screaming speed shifts on the way to the shop. :biggrin: Alan's suggestion is good; if you have a fairly large adjustable wrench, you may not need the pipe extension. Snug the jaws down real good before trying to turn it.
__________________
Loud pipes risk rights! Login or Register to Remove Ads |
|
|
04-07-2010, 12:09 PM | #4 |
Senior Member
Join Date: May 2009
Location: elgin,tx
Posts: 907
|
Re: Cannot unscrew oil filler cap!
Makes me nervous. I have visions of the top breaking off, but you gotta do what you gotta do.
__________________
Standing with the PGR until they stand for me. |
|
Thread Tools | |
Display Modes | |
|
|