MC Enterprises engine guard

Mercutio57 · 12-28-2009, 05:29 PM

I put it on this past Saturday, and recommend it to my fellow GZ owners. It looks good, and mounted easily. I did have to buy a longer bolt (for the lower mount), as the one they supplied was about 1/4" too short. Other than that there were no problems, and, as I say, it definitely dresses up the mini cruiser.

Keep the shiny side up!

mrlmd1 · 12-28-2009, 07:18 PM

I had no problem putting that on my bike with the bolt that was supplied with the guard.
I hope you got a stainless bolt so it doesn't rust.

Water Warrior 2 · 12-28-2009, 09:10 PM

Stainless or regular steel, just a dab of Loktite to secure things.

12-28-2009, 05:29 PM	#1
Mercutio57 Member Join Date: Dec 2009 Location: New York Posts: 95	MC Enterprises engine guard I put it on this past Saturday, and recommend it to my fellow GZ owners. It looks good, and mounted easily. I did have to buy a longer bolt (for the lower mount), as the one they supplied was about 1/4" too short. Other than that there were no problems, and, as I say, it definitely dresses up the mini cruiser. Keep the shiny side up! __________________ "What are you rebelling against, Johnny..?" Login or Register to Remove Ads
	0

12-28-2009, 07:18 PM	#2
mrlmd1 Senior Member Join Date: Jan 2008 Location: Crawfordville, Florida Posts: 2,853	Re: MC Enterprises engine guard I had no problem putting that on my bike with the bolt that was supplied with the guard. I hope you got a stainless bolt so it doesn't rust.
	0

12-28-2009, 09:10 PM	#3
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: MC Enterprises engine guard Stainless or regular steel, just a dab of Loktite to secure things. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode