Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

Reply
 
Thread Tools Display Modes
Old 09-18-2008, 09:34 AM   #1
jsmeltser
Junior Member
 
Join Date: Jul 2008
Location: Fort Madison, Iowa
Posts: 10
Send a message via Yahoo to jsmeltser
"Popping" noise when starting

I have a 2008 GZ250 that I've put 3500 miles on this summer. Lately, when I start from a cold start there is a loud popping noise that seems to come from the front of the bike and then when I give the bike gas I get the same sound until it warms up. Sorry I can't describe this any better. I'm going to take the bike in for the 3000 mile service but my local dealer is a complete douche so I'm not terribly confident with them. Any ideas?



Login or Register to Remove Ads
jsmeltser is offline  
Reply With Quote
Old 09-18-2008, 10:30 AM   #2
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: "Popping" noise when starting

Quote:
Originally Posted by jsmeltser
I have a 2008 GZ250 that I've put 3500 miles on this summer. Lately, when I start from a cold start there is a loud popping noise that seems to come from the front of the bike and then when I give the bike gas I get the same sound until it warms up.
Could it be just the pipes heating up and expanding? Hope so.
If that's what it is, your header bolts might be a little loose.
If you check them, be careful; they should just be snug, not TIGHT.
__________________
Loud pipes risk rights!
Easy Rider is offline  
Reply With Quote
Old 09-21-2008, 04:47 AM   #3
jsmeltser
Junior Member
 
Join Date: Jul 2008
Location: Fort Madison, Iowa
Posts: 10
Send a message via Yahoo to jsmeltser
Re: "Popping" noise when starting

That was my first thought as well. I tightened them up a bit and the sound did seem to go away for a day or two, but it's back now. I'll report back after the service...



Login or Register to Remove Ads
jsmeltser is offline  
Reply With Quote
Old 10-08-2008, 11:13 AM   #4
El Diablo
Member
 
Join Date: Jun 2008
Location: Memphis TN
Posts: 65
Re: "Popping" noise when starting

Is it popping or pootting. Could it be coming from your carburetor. My old Yamaha 350 Big Bear will get out of kilter every once in a while and will register a loud poot, kind of like a back fire, only it is more like a front fire.
__________________
El Diablo

"If there are no dogs in heaven, then I want to go where they went"
Will Rogers
El Diablo is offline  
Reply With Quote
Old 10-08-2008, 05:09 PM   #5
jsmeltser
Junior Member
 
Join Date: Jul 2008
Location: Fort Madison, Iowa
Posts: 10
Send a message via Yahoo to jsmeltser
Re: "Popping" noise when starting

lol, I'm not sure if it's a 'poot' or a pop, but I definitely describe it as a 'front-fire'.



Login or Register to Remove Ads
jsmeltser is offline  
Reply With Quote
Old 10-09-2008, 12:09 AM   #6
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: "Popping" noise when starting

Quote:
Originally Posted by jsmeltser
lol, I'm not sure if it's a 'poot' or a pop, but I definitely describe it as a 'front-fire'.
I just don't know about you young rookies...........
A real back fire comes BACK through the carb. That is why it is called a BACK fire.
What is now commonly called a backfire really isn't; it is an AFTER fire.....in the exhaust system.

EDIT: OK, that really isn't right either. One just needs to distinguish between an exhaust backfire and an intake backfire......which has all but disappeared with widespread use of fuel injection.

Brought to you by a charter member of the old farts club ! :crackup
__________________
Loud pipes risk rights!
Easy Rider is offline  
Reply With Quote
Old 10-09-2008, 12:40 AM   #7
patrick_777
Senior Member
 
Join Date: May 2008
Location: Tulsa, OK
Posts: 1,763
Send a message via ICQ to patrick_777 Send a message via AIM to patrick_777 Send a message via Yahoo to patrick_777
Re: "Popping" noise when starting

Quote:
Originally Posted by Easy Rider
Brought to you by a charter member of the old farts club ! :crackup
Thus, he is VERY familiar with things that make "poot" sounds.
__________________
]I am hiding in Honduras. I am a desperate man. Send lawyers, guns and money. The shit has hit the fan.
patrick_777 is offline  
Reply With Quote
Old 10-09-2008, 11:09 AM   #8
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: "Popping" noise when starting

[quote=patrick_777]
Quote:
Originally Posted by "Easy Rider":yn9k0031
Brought to you by a charter member of the old farts club ! :crackup
Thus, he is VERY familiar with things that make "poot" sounds.[/quote:yn9k0031]

:shocked: :neener: :skull:
__________________
Loud pipes risk rights!
Easy Rider is offline  
Reply With Quote
Old 10-13-2008, 03:33 PM   #9
Quimrider
Senior Member
 
Join Date: Jun 2007
Location: Toledo, OH
Posts: 198
Send a message via AIM to Quimrider
Re: "Popping" noise when starting

My 2000 with just under 10,000 miles makes a poot from the front of the engine when I start. The head gasket appears to have developed a leak. It is a very unusual sound. It has been doing it for a while, I just ignored it. Last Friday when leaving work. I noticed a small puff of smoke accompanied the sound from the front of the engine. It took what seemed like a dozen restarts to figure out where it was coming from. That could be the prob. but I would doubt it on such a new bike.
Quimrider is offline  
Reply With Quote
Old 10-13-2008, 05:50 PM   #10
jsmeltser
Junior Member
 
Join Date: Jul 2008
Location: Fort Madison, Iowa
Posts: 10
Send a message via Yahoo to jsmeltser
Re: "Popping" noise when starting

Well I've FINALLY got my service scheduled, so hopefully the mystery of the poot will come to a close.
jsmeltser is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:06 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.