Loose cylinder head bolt - Page 3

derbydave · 05-22-2017, 10:55 AM

Permatex Motoseal is what you want for sealing the valve cover. You can get it at most auto parts stores, it's designed for motorcycle engines and it is cheaper than Suzuki bond (probably the same stuff anyway) I used it to seal up mine and it has been leak free.

https://www.permatex.com/products/un...et-maker-grey/

onna · 05-22-2017, 10:38 PM

So far the black gasket stuff has worked. No leaks so that's a good sign. Bike only has a little over 8k miles on it but was in rough shape last year when I got it. Looked like it had been taken apart before. A couple of bolts we had to undo had the blue loctite on them, while one in the same area didn't. Now to figure out the other issue that started up for the past month.

05-22-2017, 10:55 AM	#21
derbydave Senior Member Join Date: Jan 2017 Location: KS Posts: 103	Permatex Motoseal is what you want for sealing the valve cover. You can get it at most auto parts stores, it's designed for motorcycle engines and it is cheaper than Suzuki bond (probably the same stuff anyway) I used it to seal up mine and it has been leak free. https://www.permatex.com/products/un...et-maker-grey/ __________________ 2003 Suzuki GZ250 (Sold) 1986 Suzuki Cavalcade LXE 1986 Suzuki Intruder VS700 Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-22-2017, 10:38 PM	#22
onna Junior Member Join Date: May 2015 Posts: 8	So far the black gasket stuff has worked. No leaks so that's a good sign. Bike only has a little over 8k miles on it but was in rough shape last year when I got it. Looked like it had been taken apart before. A couple of bolts we had to undo had the blue loctite on them, while one in the same area didn't. Now to figure out the other issue that started up for the past month.
	0