Customising bike, issue with new tail light... - Page 3

alantf · 06-19-2014, 04:54 PM

Quote:

Originally Posted by beefjerky

Ground is White / Black, mount this to the bulb housing.
New Red connects to original Brown.
New Black connect to original Black / White.

Afraid you've lost me! The OLD black/white (ground) to the bulb housing - fine.
New red to old brown (live feed) - fine
New black to old black/white (ground) - ? - This means that you have one live feed and two grounds. You should have two live feeds and one ground.

beefjerky · 06-19-2014, 05:22 PM

What i'm saying is:
w/b is ground and
b/w is live.

W/b has thicker white line, smaller black line

B/w has thicker black line, smaller white line

Does that make sense? Im confusing myself now haha!

Sent from my iPhone using Tapatalk

alantf · 06-20-2014, 04:43 AM

Whoops....Sorry....I was reading both black/white and white/black as black/white.

06-20-2014, 04:43 AM	#23
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Whoops....Sorry....I was reading both black/white and white/black as black/white. __________________ By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-19-2014, 05:22 PM	#22
beefjerky Member Join Date: Jan 2014 Location: Dublin, Ireland Posts: 42	What i'm saying is: w/b is ground and b/w is live. W/b has thicker white line, smaller black line B/w has thicker black line, smaller white line Does that make sense? Im confusing myself now haha! Sent from my iPhone using Tapatalk
	0