Vacuum line size Help - Page 2

mole2 · 07-26-2013, 05:41 PM

Unfortunately I don't have my GZ anymore so I can't trace it. Maybe someone else will jump in. It would seem to me if the line were off of the carb you would hear a hissing sound from the carb and the engine would run rough. Look for a capped off niple on the carb. Ride safe.

mole2 · 07-26-2013, 05:55 PM

Doing some more research I found a picture of the carb and put a circle around the nipple.

5th_bike · 07-26-2013, 09:25 PM

Yes, to discuss the picture above, the nipple is on top of the carburator tube to the cylinder, right at the rubber hose to the cylinder. So you should push the hose down onto the nipple.

And at the fuel valve, it connects at the carburator side, but you already knew that.

Kalel · 07-27-2013, 11:49 AM

Thanks Mole 2, and thanks 5th_bike. I did find it and tried the 7/32'' ( 5.5mm) hose. That one fits perfect the nipple by the petcock, but it does not fit the nipple on top of the carburetor as that nipple is very small. So my question is what is next: Do I have to buy a vacuum connector right? or is there an specific type of hose? a smaller size did not fit the nipple by the petcock. thanks for all the help...

mole2 · 07-27-2013, 08:04 PM

Quote:

Originally Posted by Kalel

Thanks Mole 2, and thanks 5th_bike. I did find it and tried the 7/32'' ( 5.5mm) hose. That one fits perfect the nipple by the petcock, but it does not fit the nipple on top of the carburetor as that nipple is very small. So my question is what is next: Do I have to buy a vacuum connector right? or is there an specific type of hose? a smaller size did not fit the nipple by the petcock. thanks for all the help...

Go to Autozone and get one of these: AutoGrade Vacuum Connector and use two pieces of tubing of two different sizes.

5th_bike · 07-27-2013, 10:44 PM

You could also order the hose, it's Suzuki part number 13686-13F10

And the clip (for tightening it at the little nipple; there is no clip at the petcock) is part number 13671-13F00

Kalel · 07-28-2013, 08:33 PM

Thanks Mole2, and thanks 5th_bike for all the answers.. I just ordered the 2 parts... thanks again

5th_bike · 07-28-2013, 10:48 PM

You're welcome, hope it works out.

:2tup:

mole2 · 07-29-2013, 01:13 AM

Quote:

Originally Posted by Kalel

Thanks Mole2, and thanks 5th_bike for all the answers.. I just ordered the 2 parts... thanks again

You're welcome. Let us know how you make out.

**jonathan180iq** · 07-29-2013, 04:54 PM

I feel like 4mm would be a proper hose size.

07-26-2013, 05:41 PM	#11
mole2 Senior Member Join Date: Dec 2009 Location: Longs, SC Posts: 1,469	Re: Vacuum line size Help Unfortunately I don't have my GZ anymore so I can't trace it. Maybe someone else will jump in. It would seem to me if the line were off of the carb you would hear a hissing sound from the carb and the engine would run rough. Look for a capped off niple on the carb. Ride safe. __________________ 2009 V-Star 650 Silverado Pearl White 2007 Suzuki GZ250 Black (sold) Login or Register to Remove Ads
	0

07-26-2013, 05:55 PM	#12
mole2 Senior Member Join Date: Dec 2009 Location: Longs, SC Posts: 1,469	Re: Vacuum line size Help Doing some more research I found a picture of the carb and put a circle around the nipple. __________________ 2009 V-Star 650 Silverado Pearl White 2007 Suzuki GZ250 Black (sold)
	0

07-26-2013, 09:25 PM	#13
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	Re: Vacuum line size Help Yes, to discuss the picture above, the nipple is on top of the carburator tube to the cylinder, right at the rubber hose to the cylinder. So you should push the hose down onto the nipple. And at the fuel valve, it connects at the carburator side, but you already knew that. __________________ 2005 "Saturn Black", stock + tach Login or Register to Remove Ads
	0

07-27-2013, 11:49 AM	#14
Kalel Member Join Date: Jul 2013 Location: New Jersey Posts: 48	Re: Vacuum line size Help Thanks Mole 2, and thanks 5th_bike. I did find it and tried the 7/32'' ( 5.5mm) hose. That one fits perfect the nipple by the petcock, but it does not fit the nipple on top of the carburetor as that nipple is very small. So my question is what is next: Do I have to buy a vacuum connector right? or is there an specific type of hose? a smaller size did not fit the nipple by the petcock. thanks for all the help...
	0

07-27-2013, 10:44 PM	#16
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	Re: Vacuum line size Help You could also order the hose, it's Suzuki part number 13686-13F10 And the clip (for tightening it at the little nipple; there is no clip at the petcock) is part number 13671-13F00 __________________ 2005 "Saturn Black", stock + tach
	0

07-28-2013, 08:33 PM	#17
Kalel Member Join Date: Jul 2013 Location: New Jersey Posts: 48	Re: Vacuum line size Help Thanks Mole2, and thanks 5th_bike for all the answers.. I just ordered the 2 parts... thanks again
	0

07-28-2013, 10:48 PM	#18
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	Re: Vacuum line size Help You're welcome, hope it works out. :2tup: __________________ 2005 "Saturn Black", stock + tach
	0

07-29-2013, 04:54 PM	#20
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: Vacuum line size Help I feel like 4mm would be a proper hose size.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode