Clutch Not Engaging

RAL · 04-04-2024, 03:33 PM

Hello,

I was riding and my clutch cable snapped. I was able to limp home by shifting w/o clutch. Wondering if I did further damage. Replaced the cable yesterday but the clutch lever is just moving freely and not "springing" back. Do I have to do a clutch rebuild or is there maybe just a spring that is not properly mounted?

Any help is appreciated!

-Radam

**Admin** · 04-05-2024, 12:18 AM

You most likely didn't do any damage, I rarely use a clutch when riding any bike/ATV once moving. I don't own a GZ250, but there's probably a spring missing or the shaft isn't correctly positioned inside.

WastelandParadise · 08-20-2024, 11:20 PM

You likely didn't do any damage, did you take the clutch arm off of the splines for the clutch release shaft? It could be that you didn't line the splines for the shaft and the clutch arm correctly. It's an easy mistake to make

04-04-2024, 03:33 PM	#1
RAL Junior Member Join Date: Apr 2024 Location: Austin, TX Posts: 1	Clutch Not Engaging Hello, I was riding and my clutch cable snapped. I was able to limp home by shifting w/o clutch. Wondering if I did further damage. Replaced the cable yesterday but the clutch lever is just moving freely and not "springing" back. Do I have to do a clutch rebuild or is there maybe just a spring that is not properly mounted? Any help is appreciated! -Radam Login or Register to Remove Ads
	0

08-20-2024, 11:20 PM	#3
WastelandParadise Junior Member Join Date: Aug 2024 Posts: 4	You likely didn't do any damage, did you take the clutch arm off of the splines for the clutch release shaft? It could be that you didn't line the splines for the shaft and the clutch arm correctly. It's an easy mistake to make Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-05-2024, 12:18 AM	#2
Admin Administrator Join Date: Nov 2013 Location: New York Posts: 48	You most likely didn't do any damage, I rarely use a clutch when riding any bike/ATV once moving. I don't own a GZ250, but there's probably a spring missing or the shaft isn't correctly positioned inside.
	0