Advice for gz 250

dave_21 · 02-02-2022, 09:58 AM

Hi bro... i have a Marauder 250 2007 Any advice for make a bobber without modify the frame and without streamlining it too much?

**jonathan180iq** · 02-03-2022, 09:43 AM

Hey Dave. Welcome.

You need to have a plan about what you want to accomplish before you take on a project like that.

The world is filled with innumerable incomplete and neglected "bobber" or "streetfighter" projects because their owners lacked the vision necessary to push through to completion.

You can make a custom bike as simply or as complicated as you like.
For exmaple, on the GZ, simply removing the back seat, shaving down the rear mud guard, relocating the licesnse plate, removing the front fender, and getting lowered handlebars will give up a more more lean look - and that doesn't require any frame modifications and very little change to the stock bike, should you want to to sell it later and retain some value.

dave_21 · 02-07-2022, 03:03 PM

Thanks jonathan so far I have modified the carburetor (needle and jet from 125 and filter k & N).
I could put a bigger jet but it satisfies me so and the candle HAS A BEAUTIFUL COLOR.
I mounted a skid plate, saddlebag support, round black aluminum footpegs, aluminum knobs and chrome front brake reservoir cap.

dave_21 · 02-07-2022, 03:09 PM

5EA6C5D3-2971-4E88-92B2-3E508DE97524.JPG

dave_21 · 02-07-2022, 03:10 PM

I bought a spring saddle with bracket ... but I have to modify and adapt it (there is some work) and the handlebar straight :-)

**jonathan180iq** · 02-08-2022, 05:37 PM

Lookin' good so far, man!

Any close up pics of that skid plate?

dave_21 · 02-09-2022, 03:01 PM

7928E309-57B0-497D-B9FB-B8CE7A17C790.JPGhere's to you, today I had an littleimage0.jpeg accident (they cut my way) and the paramotor saved my bike ... put it on too !!! It did not touch the tank or the engine on the ground.

image0.jpeg

**jonathan180iq** · 03-07-2022, 09:53 AM

Bike's looking great!

what happened in the accident?

People often overlook them, but crash bars will save not only the motor casing, but most of the bike as well.

dave_21 · 03-07-2022, 04:15 PM

_Nothing of that ... a car cut me off the road.Luckily I had a paramotor

dave_21 · 03-07-2022, 04:18 PM

Last modification ... but I know that I have to raise the handlebars more

D9B02DF5-9AD4-4EE1-8499-8BAD49D6D397[361].JPG

02-02-2022, 09:58 AM	#1
dave_21 Junior Member Join Date: Mar 2020 Posts: 7	Advice for gz 250 Hi bro... i have a Marauder 250 2007 Any advice for make a bobber without modify the frame and without streamlining it too much? Login or Register to Remove Ads
	0

02-07-2022, 03:03 PM	#3
dave_21 Junior Member Join Date: Mar 2020 Posts: 7	Thanks jonathan so far I have modified the carburetor (needle and jet from 125 and filter k & N). I could put a bigger jet but it satisfies me so and the candle HAS A BEAUTIFUL COLOR. I mounted a skid plate, saddlebag support, round black aluminum footpegs, aluminum knobs and chrome front brake reservoir cap. Login or Register to Remove Ads
	1

02-07-2022, 03:10 PM	#5
dave_21 Junior Member Join Date: Mar 2020 Posts: 7	I bought a spring saddle with bracket ... but I have to modify and adapt it (there is some work) and the handlebar straight :-) Login or Register to Remove Ads
	1

02-09-2022, 03:01 PM	#7
dave_21 Junior Member Join Date: Mar 2020 Posts: 7	7928E309-57B0-497D-B9FB-B8CE7A17C790.JPGhere's to you, today I had an littleimage0.jpeg accident (they cut my way) and the paramotor saved my bike ... put it on too !!! It did not touch the tank or the engine on the ground. image0.jpeg Last edited by dave_21; 02-09-2022 at 03:04 PM.
	2

03-07-2022, 04:15 PM	#9
dave_21 Junior Member Join Date: Mar 2020 Posts: 7	suzuki gz 250 _Nothing of that ... a car cut me off the road.Luckily I had a paramotor
	0

02-03-2022, 09:43 AM	#2
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Hey Dave. Welcome. You need to have a plan about what you want to accomplish before you take on a project like that. The world is filled with innumerable incomplete and neglected "bobber" or "streetfighter" projects because their owners lacked the vision necessary to push through to completion. You can make a custom bike as simply or as complicated as you like. For exmaple, on the GZ, simply removing the back seat, shaving down the rear mud guard, relocating the licesnse plate, removing the front fender, and getting lowered handlebars will give up a more more lean look - and that doesn't require any frame modifications and very little change to the stock bike, should you want to to sell it later and retain some value.
	3

02-07-2022, 03:09 PM	#4
dave_21 Junior Member Join Date: Mar 2020 Posts: 7	5EA6C5D3-2971-4E88-92B2-3E508DE97524.JPG
	2

02-08-2022, 05:37 PM	#6
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Lookin' good so far, man! Any close up pics of that skid plate?
	1

03-07-2022, 09:53 AM	#8
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Bike's looking great! what happened in the accident? People often overlook them, but crash bars will save not only the motor casing, but most of the bike as well.
	0

03-07-2022, 04:18 PM	#10
dave_21 Junior Member Join Date: Mar 2020 Posts: 7	new handlebar and mirrors Last modification ... but I know that I have to raise the handlebars moreD9B02DF5-9AD4-4EE1-8499-8BAD49D6D397[361].JPG
	1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode