High Idle even with Pilot Screw all the way in.

rider_al · 07-14-2021, 10:30 AM

Hi All,
After my bike has warmed up the idle is still very high even with the pilot screw all the way in. I was hoping that the engine would cut off when idle but it still revs high.
I have checked for vacuum leaks ( sprayed cab cleaner around the boot) and it doesn't rev up. So I don't think this is a problem.
Could it be there is a leak with the pilot screw ? Mind you I have replace the pilot screw from a new rebuild kit and it still idle high when it's screwed all the way in.
Would appreciate it if anyone has any ideas.

Stilkikn · 07-14-2021, 07:38 PM

You've probably checked this already but in case you haven't, make sure your choke is returning to normal position when you close the lever, sometimes they get a bit sticky. Mine was like that when I got it but freed up quickly with use.

EddieSC · 07-14-2021, 11:21 PM

Quote:

Originally Posted by Stilkikn

You've probably checked this already but in case you haven't, make sure your choke is returning to normal position when you close the lever, sometimes they get a bit sticky. Mine was like that when I got it but freed up quickly with use.

Yeah I had the same issue. I actually swapped it over to a direct choke when I bobbed my bike out because I was tired of dealing with it

rider_al · 07-15-2021, 11:27 PM

It was definitely the choke. Thanks for the wonderful feed back. I changed the choke cable and now it's running fine. The engine now dies with the pilot screw all the way in ( which is expected)
Thanks again.

Mlamey · 07-24-2021, 05:23 AM

I found that depending on how you down shift , let the bike lope mine goes down and my opinion is it's doing it's best at imitating a Harley it's a baby loper . And if you run it right you can go 55- 70? Don't think I've ever seen 70 but that's me. in 5th or 20 in 3rd or fourth I've had compliments on this effect . idk my math is probably way off but I run mine like a mini hog and she loves it.

07-14-2021, 10:30 AM	#1
rider_al Junior Member Join Date: Jun 2021 Posts: 2	High Idle even with Pilot Screw all the way in. Hi All, After my bike has warmed up the idle is still very high even with the pilot screw all the way in. I was hoping that the engine would cut off when idle but it still revs high. I have checked for vacuum leaks ( sprayed cab cleaner around the boot) and it doesn't rev up. So I don't think this is a problem. Could it be there is a leak with the pilot screw ? Mind you I have replace the pilot screw from a new rebuild kit and it still idle high when it's screwed all the way in. Would appreciate it if anyone has any ideas. Login or Register to Remove Ads
	0

07-24-2021, 05:23 AM	#5
Mlamey Junior Member Join Date: Jul 2021 Posts: 14	I found that depending on how you down shift , let the bike lope mine goes down and my opinion is it's doing it's best at imitating a Harley it's a baby loper . And if you run it right you can go 55- 70? Don't think I've ever seen 70 but that's me. in 5th or 20 in 3rd or fourth I've had compliments on this effect . idk my math is probably way off but I run mine like a mini hog and she loves it. Login or Register to Remove Ads Last edited by Mlamey; 07-24-2021 at 05:25 AM.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-14-2021, 07:38 PM	#2
Stilkikn Junior Member Join Date: Jan 2021 Posts: 17	You've probably checked this already but in case you haven't, make sure your choke is returning to normal position when you close the lever, sometimes they get a bit sticky. Mine was like that when I got it but freed up quickly with use.
	0

07-15-2021, 11:27 PM	#4
rider_al Junior Member Join Date: Jun 2021 Posts: 2	It was definitely the choke. Thanks for the wonderful feed back. I changed the choke cable and now it's running fine. The engine now dies with the pilot screw all the way in ( which is expected) Thanks again.
	1