2005 Suzuki GZ250

CoachRuiz · 03-11-2021, 04:01 PM

Hello all, good to be part of the group!

I’m a pretty handy guy, but need a little guidance . The bike I got looks pretty clean but some ripped the wiring from the handle bars....on both sides. The rest of the wiring harness looks to be in a good shape.....however I had to buy a new right hand starter switch, and a left hand lights and horn switch, and if course the wiring colors dont match.

I don’t mind splicing wires but how do I know which wires to splice?

Next question.... I would like to be able to see if the bike will turn over, so I need all the wiring connected to do that? Thanks for any help.

Vegas Street Rider · 03-11-2021, 04:19 PM

Welcome to the forum. Your manual should have the wiring diagram in it and I believe one of the recent new members posted a great wiring diagram that is easy to read and follow. Just do the search.

Good luck with your project.

I found the wiring diagram in the Trouble Shooting section of the forum. Look at the posting by GUNK on Feb. 1st. Hope that helps.

CoachRuiz · 03-11-2021, 04:49 PM

Thanks I’ll checknitmout

03-11-2021, 04:01 PM	#1
CoachRuiz Junior Member Join Date: Mar 2021 Posts: 2	2005 Suzuki GZ250 Hello all, good to be part of the group! I’m a pretty handy guy, but need a little guidance . The bike I got looks pretty clean but some ripped the wiring from the handle bars....on both sides. The rest of the wiring harness looks to be in a good shape.....however I had to buy a new right hand starter switch, and a left hand lights and horn switch, and if course the wiring colors dont match. I don’t mind splicing wires but how do I know which wires to splice? Next question.... I would like to be able to see if the bike will turn over, so I need all the wiring connected to do that? Thanks for any help. Login or Register to Remove Ads
	1

03-11-2021, 04:19 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	Welcome to the forum. Your manual should have the wiring diagram in it and I believe one of the recent new members posted a great wiring diagram that is easy to read and follow. Just do the search. Good luck with your project. I found the wiring diagram in the Trouble Shooting section of the forum. Look at the posting by GUNK on Feb. 1st. Hope that helps. Last edited by Vegas Street Rider; 03-11-2021 at 04:31 PM. Reason: additional info
	0

03-11-2021, 04:49 PM	#3
CoachRuiz Junior Member Join Date: Mar 2021 Posts: 2	Thanks I’ll checknitmout Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode