07-21-2008, 06:06 PM | #2 |
Senior Member
Join Date: May 2007
Location: New Port Richey, Florida USA
Posts: 1,348
|
Tail light
Looks like whoever installed the blue dot tail light lens did not tighten the screws properly and they fell out.
:oops:
__________________
Prudent riders live longer than moron riders. |
|
07-21-2008, 10:06 PM | #4 |
Senior Member
Join Date: May 2007
Location: New Port Richey, Florida USA
Posts: 1,348
|
Your Problem
I'm still fairly sure just a couple of screws have fallen out. Just get a mirror and a flashlight and it should be fairly evident what has happened. Look at this microfiche on the Ron Ayers site.
http://fiche.ronayers.com/Index.cfm/...ENDER_MODEL_K3 You may want to bookmark this site as it gives you blow ups of everything on the bike. Probably part #16 or #17 has fallen out. Hope this fixes you up. Good Luck. :chop:
__________________
Prudent riders live longer than moron riders. |
|
Thread Tools | |
Display Modes | |
|
|