Motorcycle Jack Stands - Page 5

5th_bike · 08-15-2014, 07:54 PM

He already took Fawlty's advice, his last time here was more than a year ago. Mounted the pad on his keyboard real well.

bschift · 08-21-2014, 09:03 PM

Well, I made these stands but I must be missing something. When I try to slide it under the swing arm on the right side the bottom of the stand hits the tire before it gets under the swing arm. I checked all my measurements and they seem to be right. I can straighten the bike up then push the stand under the swing arm from the right, but this is a little dicey for a one-man operation. Does my stand just lean to much? Has anyone else seem this?

Thanks.

**jonathan180iq** · 08-22-2014, 05:47 PM

As long as the base of your stand and the vertical leg are flush, then you should be fine.

You do have to tilt the bike just a smidge to get them under. But it's no more precarious than trying to lift any other bike onto a center stand. Once you get a feel for it you'll be fine.

bschift · 08-22-2014, 08:10 PM

Quote:

Originally Posted by jonathan180iq

As long as the base of your stand and the vertical leg are flush, then you should be fine.

You do have to tilt the bike just a smidge to get them under. But it's no more precarious than trying to lift any other bike onto a center stand. Once you get a feel for it you'll be fine.

I'm not sure I understand what you're saying. I can get part of the jack under the swing arm on the right but then the bottom part of the wood hits the tire. I can't get it in far enough to get the cutout to "grab" the swing arm. The top of the wood is only about halfway across the swing arm when the bottom if hits the tire.

If I tilt the bike to the right (of the stand) the jack won't go under the swing arm. Guess I could shorten the jack but then I don't know if I"d have enough clearance to spin the wheel.

Fawlty · 08-23-2014, 03:41 AM

Any chance of posting some photos, so we can see your predicament?

bschift · 08-23-2014, 07:44 PM

Well, my bad. If you just tilt the stand a little so the notch on the top goes around the swing arm, when you tilt the bike up, the stand straightens out perfectly.

Oh boy, now I get to clean and oil my chain!

Sorry for the trouble and thanks for the help.

**jonathan180iq** · 08-25-2014, 09:06 AM

Now you get it!

Glad you got it sorted.

08-15-2014, 07:54 PM	#41
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	He already took Fawlty's advice, his last time here was more than a year ago. Mounted the pad on his keyboard real well. __________________ 2005 "Saturn Black", stock + tach Login or Register to Remove Ads Last edited by 5th_bike; 08-15-2014 at 08:02 PM. Reason: typo
	0

08-21-2014, 09:03 PM	#42
bschift Junior Member Join Date: Aug 2013 Location: Whitney, TX Posts: 13	Why am I the only stupid one. Well, I made these stands but I must be missing something. When I try to slide it under the swing arm on the right side the bottom of the stand hits the tire before it gets under the swing arm. I checked all my measurements and they seem to be right. I can straighten the bike up then push the stand under the swing arm from the right, but this is a little dicey for a one-man operation. Does my stand just lean to much? Has anyone else seem this? Thanks.
	0

08-22-2014, 05:47 PM	#43
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	As long as the base of your stand and the vertical leg are flush, then you should be fine. You do have to tilt the bike just a smidge to get them under. But it's no more precarious than trying to lift any other bike onto a center stand. Once you get a feel for it you'll be fine. Login or Register to Remove Ads
	0

08-23-2014, 03:41 AM	#45
Fawlty Senior Member Join Date: Jan 2013 Location: Murcia, Spain Posts: 683	Any chance of posting some photos, so we can see your predicament? __________________ "It begins here for me on this road. How the whole mess happened I don't know, but I know it couldn't happen again in a million years." (Johnny Strabbler-The Wild One 1953) Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-23-2014, 07:44 PM	#46
bschift Junior Member Join Date: Aug 2013 Location: Whitney, TX Posts: 13	Well, my bad. If you just tilt the stand a little so the notch on the top goes around the swing arm, when you tilt the bike up, the stand straightens out perfectly. Oh boy, now I get to clean and oil my chain! Sorry for the trouble and thanks for the help.
	0

08-25-2014, 09:06 AM	#47
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Now you get it! Glad you got it sorted.
	0