Rear Sprocket

mcintyre_aerospace · 09-23-2007, 06:33 AM

I dont know if this is the right place to ask this, but is there any smaller rear sprockets for this bike. If anyone knows please tell me.

Jaime · 09-23-2007, 09:08 AM

You could drill bigger holes (8.5 -> 10.5) in the JT Sprockets JTR 819.39 to match GZ250 bolts.

Easy Rider · 09-23-2007, 01:04 PM

Quote:

Originally Posted by mcintyre_aerospace

I dont know if this is the right place to ask this, but is there any smaller rear sprockets for this bike. If anyone knows please tell me.

And why would you change to a smaller rear when a 1 tooth larger front is SOOOOO much easier ??

Jaime · 09-23-2007, 01:14 PM

[quote=Easy Rider]

Quote:

Originally Posted by "mcintyre_aerospace":dppbrubb

I dont know if this is the right place to ask this, but is there any smaller rear sprockets for this bike. If anyone knows please tell me.

And why would you change to a smaller rear when a 1 tooth larger front is SOOOOO much easier ??[/quote:dppbrubb]

Maybe he wants both. :roll:

davidc83 · 09-23-2007, 08:14 PM

Changing the front would be easier if you could get one. Every place mentioned on here, I have ordered and been backordered for weeks, so I cancel the orders. I am not waiting 3-8 weeks for a sprocket.

Easy Rider · 09-23-2007, 10:14 PM

Quote:

Originally Posted by davidc83

Changing the front would be easier if you could get one. Every place mentioned on here, I have ordered and been backordered for weeks, so I cancel the orders. I am not waiting 3-8 weeks for a sprocket.

As opposed to what.........not getting one EVER?? :??:

I have suggested repeatedly that you try to get one through a Suzuki dealer. Have you tried that too? :cool:

davidc83 · 09-24-2007, 12:46 PM

Yes, as opposed to ever. I dont mind the sound of the engine, so if I never replace it with a 16T, no big deal; I will not ever deal with my dealer again and the other close dealer tried and was told 4 weeks. Heck, the spokes for my back wheel are on backorder. I have been waiting 3 weeks for them. Since I have one broke spoke on the rear, I will wait for them.

**jonathan180iq** · 09-24-2007, 01:04 PM

I think Easy was talking about this:

-Info property of Jaime

Hey, guys! I don't know if you already have it, but I've found the Suzuki OEM part number for the 16T sprocket!
It was used in the GN/DR 400 1980-1982. You may buy it at any Suzuki dealer.

Here we go... # 27511-37200

**jonathan180iq** · 07-09-2008, 11:40 AM

I don't think Mcintyre comes around anymore but, here you go...

Sprocket Specialist part # 461-(desired number of teeth)

The OEM equal would be # 461-41

09-23-2007, 06:33 AM	#1
mcintyre_aerospace Member Join Date: May 2007 Location: Fort Stockton, TX Posts: 78	Rear Sprocket I dont know if this is the right place to ask this, but is there any smaller rear sprockets for this bike. If anyone knows please tell me. Login or Register to Remove Ads
	0

09-23-2007, 09:08 AM	#2
Jaime Senior Member Join Date: Jul 2007 Location: Spain Posts: 102	You could drill bigger holes (8.5 -> 10.5) in the JT Sprockets JTR 819.39 to match GZ250 bolts. __________________ Trying my best in English
	0

09-23-2007, 08:14 PM	#5
davidc83 Senior Member Join Date: Jan 2007 Posts: 184	Changing the front would be easier if you could get one. Every place mentioned on here, I have ordered and been backordered for weeks, so I cancel the orders. I am not waiting 3-8 weeks for a sprocket. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-24-2007, 12:46 PM	#7
davidc83 Senior Member Join Date: Jan 2007 Posts: 184	Yes, as opposed to ever. I dont mind the sound of the engine, so if I never replace it with a 16T, no big deal; I will not ever deal with my dealer again and the other close dealer tried and was told 4 weeks. Heck, the spokes for my back wheel are on backorder. I have been waiting 3 weeks for them. Since I have one broke spoke on the rear, I will wait for them.
	0

09-24-2007, 01:04 PM	#8
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	I think Easy was talking about this: -Info property of Jaime Hey, guys! I don't know if you already have it, but I've found the Suzuki OEM part number for the 16T sprocket! It was used in the GN/DR 400 1980-1982. You may buy it at any Suzuki dealer. Here we go... # 27511-37200
	0

07-09-2008, 11:40 AM	#9
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	I don't think Mcintyre comes around anymore but, here you go... Sprocket Specialist part # 461-(desired number of teeth) The OEM equal would be # 461-41
	0