Bolts on the gear selector assembly

Jvacustoms · 10-19-2011, 11:33 AM

I don't know how many people drive as I do but I have found that when I ride through a lot of twistys, The heads on those bolts get ground down till they are almost impossible to remove with a wrench. I just thought that I would share this information. The bolts that go there are flanged M8 x 20 x 1.0 and are available at most hardware stores for about a dollar each.

**jonathan180iq** · 10-19-2011, 02:14 PM

If you have a lot of sweeping uphill turns, I can see that happening a lot. If not, you might need switch to something with a little more ground/turn clearance.

That's pretty aggressive leaning for the GZ.

Jvacustoms · 10-19-2011, 02:35 PM

I do have a lot of sweeping uphill turns and a lot of sweeping down hill turns on my way to work. But I may be a pretty aggressive rider I don't know. I also have alot peg draggin twistys around my house banked of course.

Water Warrior 2 · 10-19-2011, 04:18 PM

It is really quite surprising what the little price point bike can do in the twisties. Lynda always liked the sure footed feeling in curves. I would like to ride the Tail of the Dragon on a GZ. That may sound kinda silly but the Dragon is far too dangerous for a fast sport bike. I would rather ride a slow bike fast than a fast bike slow.

Jvacustoms · 10-19-2011, 04:40 PM

Quote:

Originally Posted by Water Warrior

I would like to ride the Tail of the Dragon on a GZ.

Let me know I am game to take the dragon that seems just like my kinda road kinda looks like the roads i take to my moms around all the lakes in Georgia.

Water Warrior 2 · 10-19-2011, 04:56 PM

Quote:

Originally Posted by Jvacustoms

Quote:

Originally Posted by Water Warrior

I would like to ride the Tail of the Dragon on a GZ.

Let me know I am game to take the dragon that seems just like my kinda road kinda looks like the roads i take to my moms around all the lakes in Georgia.

I was there in 07 for the 4th of July weekend. Rented a KLR 650 for the Dragon. Then had to aim the car back to the west coast. The car morphed into a truck in Alberta. Should have had a truck to begin with.

10-19-2011, 11:33 AM	#1
Jvacustoms Senior Member Join Date: Jul 2011 Location: Eatonton, GA Posts: 237	Bolts on the gear selector assembly I don't know how many people drive as I do but I have found that when I ride through a lot of twistys, The heads on those bolts get ground down till they are almost impossible to remove with a wrench. I just thought that I would share this information. The bolts that go there are flanged M8 x 20 x 1.0 and are available at most hardware stores for about a dollar each. Login or Register to Remove Ads
	0

10-19-2011, 02:14 PM	#2
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: Bolts on the gear selector assembly If you have a lot of sweeping uphill turns, I can see that happening a lot. If not, you might need switch to something with a little more ground/turn clearance. That's pretty aggressive leaning for the GZ.
	0

10-19-2011, 02:35 PM	#3
Jvacustoms Senior Member Join Date: Jul 2011 Location: Eatonton, GA Posts: 237	Re: Bolts on the gear selector assembly I do have a lot of sweeping uphill turns and a lot of sweeping down hill turns on my way to work. But I may be a pretty aggressive rider I don't know. I also have alot peg draggin twistys around my house banked of course. Login or Register to Remove Ads
	0

10-19-2011, 04:18 PM	#4
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Bolts on the gear selector assembly It is really quite surprising what the little price point bike can do in the twisties. Lynda always liked the sure footed feeling in curves. I would like to ride the Tail of the Dragon on a GZ. That may sound kinda silly but the Dragon is far too dangerous for a fast sport bike. I would rather ride a slow bike fast than a fast bike slow.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode