07-14-2011, 04:53 PM | #1 |
Junior Member
Join Date: Jul 2011
Location: Dayton, TN
Posts: 5
|
Engine question: VALVES?!
Websites state that the GZ250 has a TWO VALVE head.
The Service Manual shows what appears to be 3 valve springs, and on the underside, two intakes and two exhausts! Are these pics correct for the GZ250, or are they using a different set of pics for the service manual? The two exhaust pipes WOULD indicate something different about this single cylinder. "TWIN DOME" combustion chamber might be another clue... Are the pistons domed? with the spark plug in the center of the combustion chamber, that would make it sorta like a little hemi engine, right? ANYBODY every had theirs apart? RBar Login or Register to Remove Ads |
|
07-14-2011, 05:23 PM | #2 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: Engine question: VALVES?!
The Gz is a single cylinder 4 valve engine. 2 intake and 2 exhuast valves. Each exhuast valve has it's own port and header pipe. The pipes join up in a single muffler system. There is a single carb feeding the 2 intakes.
At one time the GZ did have only 2 valves, one intake and one exhuast. On the 4 valve head there is a single rocker arm with 2 fingers to operate the 2 intake valves and another rocker with 2 fingers to operate the exhuast valves. hope this helps. |
|
07-14-2011, 05:29 PM | #3 | |
Junior Member
Join Date: Jul 2011
Location: Dayton, TN
Posts: 5
|
Re: Engine question: VALVES?!
EXACTLY answers my question, thanks!
So, each exhaust side has its own pipe...cool. RBar Quote:
Login or Register to Remove Ads |
|
|
07-14-2011, 10:07 PM | #4 |
Senior Member
Join Date: Mar 2011
Location: dahlonega GA
Posts: 563
|
Re: Engine question: VALVES?!
i thougth each valve had its own cam lobe. and when was the gz a 2 valve?
__________________
99 gz 250 and a currently dismantled fzr 1000 |
|
07-14-2011, 10:12 PM | #5 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: Engine question: VALVES?!
Quote:
:cool: Login or Register to Remove Ads |
|
|
07-14-2011, 10:41 PM | #6 |
Senior Member
Join Date: Mar 2011
Location: dahlonega GA
Posts: 563
|
Re: Engine question: VALVES?!
i thought so, i have the first year of the gz and its a four valve.
__________________
99 gz 250 and a currently dismantled fzr 1000 |
|
07-14-2011, 11:05 PM | #7 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: Engine question: VALVES?!
Quote:
:rawk: |
|
|
07-14-2011, 11:39 PM | #8 |
Senior Member
Join Date: Mar 2011
Location: dahlonega GA
Posts: 563
|
Re: Engine question: VALVES?!
the new one?
__________________
99 gz 250 and a currently dismantled fzr 1000 |
|
07-15-2011, 12:34 AM | #9 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: Engine question: VALVES?!
Quote:
:cool: |
|
|
Thread Tools | |
Display Modes | |
|
|