Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

Reply
 
Thread Tools Display Modes
Old 09-02-2010, 10:42 AM   #41
Fish Baseball
Senior Member
 
Join Date: Oct 2009
Location: melbourne vic
Posts: 116
Re: Idle problems

well a little update on the slow going it is to figure out what is keeping the little bike down.....

- runs fine now. until it fouls the plugs and puts us back to square 1.
- still fills the airbox with petrol and oil.
- the hole in the exhaust pipe is fixed!
- the fuel tank pipe (the one that switches from main to reserve) now is fixed, so the petcock actually does something now
- new cylinder head, new piston + rings.....
- carb is next on the list to replace/rebuild/murder

but the little bike runs now, and is getting better......well until it fouls its plugs and we can't start it.
__________________
Beneath the Southern Cross I stand.



Login or Register to Remove Ads
Fish Baseball is offline  
Reply With Quote
Old 09-02-2010, 12:36 PM   #42
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: Idle problems

Quote:
Originally Posted by Fish Baseball
- still fills the airbox with petrol and oil.
- the hole in the exhaust pipe is fixed!
.....well until it fouls its plugs and we can't start it.
Your fouling problem sounds a lot like a stuck float or needle valve that is dumping raw gas into the chamber......and then down into the oil too. Best that you NOT run it much until you get that figured out.......or the next trick will be a LOWER rebuild for new bearings.

I hope the exhaust hole you fixed wasn't the one in the bottom.......that is there on purpose to drain out water !! :biggrin:
__________________
Loud pipes risk rights!
Easy Rider is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:00 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.