05-15-2010, 03:15 AM | #11 | |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: click but no start
Quote:
Login or Register to Remove Ads |
|
|
05-15-2010, 12:24 PM | #12 | |
Senior Member
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
|
Re: click but no start
Quote:
If anybody EVER needed to get and read an owners manual it certainly is Chaz !!! :roll:
__________________
Loud pipes risk rights! |
|
|
05-15-2010, 12:28 PM | #13 | |
Senior Member
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
|
Re: click but no start
Quote:
__________________
Loud pipes risk rights! Login or Register to Remove Ads |
|
|
05-15-2010, 12:31 PM | #14 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: click but no start
I would think(uneducated wild ass guess)the gear oil's rating is primarily for shear characteristics.
|
|
05-15-2010, 04:26 PM | #15 |
Senior Member
Join Date: Jun 2008
Location: Hot Springs Arkansas
Posts: 1,127
|
Re: click but no start
I think he means he filled it up to the cap, in which case would definitely cause some serious problems.
__________________
"Tell me what kind of wreck you're going to have and I'll tell you what type of helmet you need." [Author Unknown] Login or Register to Remove Ads |
|
05-15-2010, 05:41 PM | #16 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: click but no start
Hmm, that would seriously upset the GZ's sense of humor. :lol:
|
|
05-18-2010, 12:40 AM | #17 |
Junior Member
Join Date: May 2010
Location: Stillwater, ok
Posts: 4
|
Re: click but no start
I love how helpful the people on this site are. Yes, i overfilled the oil, i thought it took both engine oil and trani fluid like a car. Finally found the problem, and its again my fault. When i ttok the crankcase off the gasket was worn so i replaced it with liquid gasket maker. the loss of the 1/16 inch space caused the case to put pressure on the starter gear, and thus not start. ordered the part and will be in in three days. thanks again to everyone, and yes i started reading the manual.
|
|
05-18-2010, 12:55 AM | #18 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: click but no start
Good catch. I never would have thought of that. 1/16 of an inch and a totally dead bike. You have just added a very interesting bit of knowledge to the forum. Thank you.
|
|
Thread Tools | |
Display Modes | |
|
|