Santa was good to me - Page 2

abadflea · 05-31-2007, 01:37 AM

Wow that is a crazy windshield, is it made for the GZ? I can not decide if i'm going to get one or not. There is a couple of cheaper ones on ebay right now that i have looked at.

Water Warrior 2 · 05-31-2007, 01:56 AM

JNortonSR. Just looking at your bag brackets and have a question. When you mounted the brackets did you need longer bolts to mount them ?? I am assuming the 8 mm bolts were used for fabrication and the mounting. Also, did you mount the brackets on the outside or inside of the horizontal chrome pieces of the rear fender ?? Can't seem to get a real clear picture on the screen today. Thanks in advance for your reply.

jnortonsr · 05-31-2007, 05:17 AM

I did have to get longer bolts. You can get them at any hardware store but ACE is the best. If you take the chrome nut with you, you can make sure that they fit. I also bought washers because the GZ has indentions on the side rails and I wanted them flush and didn't want to scratch them. Since you cant see them it doesn't matter if they're chrome but they are only 10 cents apiece

jnortonsr · 05-31-2007, 05:20 AM

It does look and work great, I keep getting accused of trying to turn it into a Gold Wing want a be. You can also find them on EBAY but everyone keeps bidding them up to high. www.mawonline.com has them for the cheepest price new.

Water Warrior 2 · 05-31-2007, 10:39 PM

Thanks JNortonSR. Looks like I have a little project now.

davtnn · 07-01-2008, 02:18 AM

now that is just darned cleaver ....

05-31-2007, 01:37 AM	#11
abadflea Junior Member Join Date: Apr 2007 Posts: 12	Wow that is a crazy windshield, is it made for the GZ? I can not decide if i'm going to get one or not. There is a couple of cheaper ones on ebay right now that i have looked at. __________________ I have no signature!! Login or Register to Remove Ads
	0

05-31-2007, 05:17 AM	#13
jnortonsr Junior Member Join Date: Sep 2006 Posts: 20	Bolts for Saddle Bags I did have to get longer bolts. You can get them at any hardware store but ACE is the best. If you take the chrome nut with you, you can make sure that they fit. I also bought washers because the GZ has indentions on the side rails and I wanted them flush and didn't want to scratch them. Since you cant see them it doesn't matter if they're chrome but they are only 10 cents apiece __________________ 2003 GZ250 Login or Register to Remove Ads
	0

05-31-2007, 05:20 AM	#14
jnortonsr Junior Member Join Date: Sep 2006 Posts: 20	Slipstreamer SS-28 It does look and work great, I keep getting accused of trying to turn it into a Gold Wing want a be. You can also find them on EBAY but everyone keeps bidding them up to high. www.mawonline.com has them for the cheepest price new. __________________ 2003 GZ250
	0

05-31-2007, 10:39 PM	#15
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Thanks JNortonSR. Looks like I have a little project now. Login or Register to Remove Ads
	0

07-01-2008, 02:18 AM	#16
davtnn Senior Member Join Date: Sep 2007 Location: lafayette Tenn Posts: 110	now that is just darned cleaver .... __________________ 2008 black GZ250
	0

05-31-2007, 01:56 AM	#12
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	JNortonSR. Just looking at your bag brackets and have a question. When you mounted the brackets did you need longer bolts to mount them ?? I am assuming the 8 mm bolts were used for fabrication and the mounting. Also, did you mount the brackets on the outside or inside of the horizontal chrome pieces of the rear fender ?? Can't seem to get a real clear picture on the screen today. Thanks in advance for your reply.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode