Adjusting Gearshift lever

1Rogue · 05-15-2007, 04:53 PM

Is there a way to adjust the foot gearshift lever up or down? Mine seems to be a little high to shift gears comfortably. I couldn't find anything in the service manual about doing it.

Water Warrior 2 · 05-16-2007, 01:53 AM

Yes there is as a matter of fact. There is an adjustment rod between the actual shifter lever and the shaft that comes out the side of the transmission case. Undo the lock nuts on each end(keep in mind one end has a reversed thread) and turn the rod. As you turn the rod the shifter lever will raise or lower. Find the position you need most and tighten the locking nuts. Make the adjustment with the boots/shoes normally worn while riding. Minimum of tools needed and once done you will feel much better astride the bike. Ride safe.

1Rogue · 05-18-2007, 12:14 PM

Thanks Water Warrior! Sound pretty easy, I'm going to try this out this evening

05-15-2007, 04:53 PM	#1
1Rogue Member Join Date: May 2007 Location: Sachse, TX Posts: 41	Adjusting Gearshift lever Is there a way to adjust the foot gearshift lever up or down? Mine seems to be a little high to shift gears comfortably. I couldn't find anything in the service manual about doing it. Login or Register to Remove Ads
	0

05-18-2007, 12:14 PM	#3
1Rogue Member Join Date: May 2007 Location: Sachse, TX Posts: 41	Thanks Water Warrior! Sound pretty easy, I'm going to try this out this evening Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-16-2007, 01:53 AM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Yes there is as a matter of fact. There is an adjustment rod between the actual shifter lever and the shaft that comes out the side of the transmission case. Undo the lock nuts on each end(keep in mind one end has a reversed thread) and turn the rod. As you turn the rod the shifter lever will raise or lower. Find the position you need most and tighten the locking nuts. Make the adjustment with the boots/shoes normally worn while riding. Minimum of tools needed and once done you will feel much better astride the bike. Ride safe.
	0