Helmet Visor help

deadman13 · 11-29-2008, 11:13 PM

I have a problem with my visor and glasses fogging up when im riding. It doesnt happen all the time, and i usually have to crack it open a bit to get it to clear.

Anyone have any tips to help reduce this? I have no clue as to what brand it is, and it does have 2 top vents and a mouth vent, but i see no difference if theyre open or not.

also, since it was raining on the way home, anyone ever use rain-x on their sheilds? thanks~!

5th_bike · 11-29-2008, 11:57 PM

Quote:

Originally Posted by deadman13

I have a problem with my visor and glasses fogging up when im riding. It doesnt happen all the time, and i usually have to crack it open a bit to get it to clear.

Anyone have any tips to help reduce this?

I have not tried any of the anti-fogging chemicals discussed where, when mine fogs up I usually just breathe in through my nose, and breathe out by blowing air down, out of the helmet. That does help keep the fogging down. And crack the visor a bit.

alanmcorcoran · 11-30-2008, 04:44 AM

There are antifog cloths you can try - you can probably get them anywhere they sell ski goggles. They work pretty well on ski goggles. I just open the my shield a crack (an option not available for ski goggles.)

There is another thread on here that discusses Rain-X. To me it was somewhat inconclusive - I think it depended on whether you consider your face shield to be plastic or poly carbonate (I always thought polycarbonate WAS plastic, but I'm not an engineer.) Search for Rain-X and you will find it. I think Rain-X woud go on the OUTSIDE and is for RAIN. The anti fog wipe is for the INSIDE.

goneoutflying · 12-04-2008, 10:43 AM

I have the same problem. I have tried using the anti-fog spray/wipes on the sheild which seems to work a little bit.

However I saw this mask at Cycle Gear that seems like its a goog idea.

http://www.cyclegear.com/spgm.cfm?L1=&L ... 5-RFG01BLK

11-29-2008, 11:13 PM	#1
deadman13 Member Join Date: May 2008 Location: Charleston SC Posts: 92	Helmet Visor help I have a problem with my visor and glasses fogging up when im riding. It doesnt happen all the time, and i usually have to crack it open a bit to get it to clear. Anyone have any tips to help reduce this? I have no clue as to what brand it is, and it does have 2 top vents and a mouth vent, but i see no difference if theyre open or not. also, since it was raining on the way home, anyone ever use rain-x on their sheilds? thanks~! Login or Register to Remove Ads
	0

11-30-2008, 04:44 AM	#3
alanmcorcoran Senior Member Join Date: Jul 2008 Location: Anaheim, CA Posts: 2,926	Re: Helmet Visor help There are antifog cloths you can try - you can probably get them anywhere they sell ski goggles. They work pretty well on ski goggles. I just open the my shield a crack (an option not available for ski goggles.) There is another thread on here that discusses Rain-X. To me it was somewhat inconclusive - I think it depended on whether you consider your face shield to be plastic or poly carbonate (I always thought polycarbonate WAS plastic, but I'm not an engineer.) Search for Rain-X and you will find it. I think Rain-X woud go on the OUTSIDE and is for RAIN. The anti fog wipe is for the INSIDE. __________________ [hr:5yt6ldkq][/hr:5yt6ldkq] http://alanmarkcorcoran.com Motorcycles, Music, Musings and More… Login or Register to Remove Ads
	0

12-04-2008, 10:43 AM	#4
goneoutflying Member Join Date: Oct 2008 Location: Daytona Beach, FL Posts: 51	Re: Helmet Visor help I have the same problem. I have tried using the anti-fog spray/wipes on the sheild which seems to work a little bit. However I saw this mask at Cycle Gear that seems like its a goog idea. http://www.cyclegear.com/spgm.cfm?L1=&L ... 5-RFG01BLK __________________ I reject your reality and substitute my own!
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode