Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-02-2018, 04:21 PM   #1
JGunn
Junior Member
 
Join Date: Jun 2018
Posts: 18
No idle unless I blip throttle for 7 secs

My 2007 GZ dies at every stop. So, what I've learned to do is after stopping I will ever so lightly blip the throttle until the bike starts idling again. So, I don't have an idling problem per se, it just dies when I immediately close the throttle when coming into a stop sign. Sometimes when the bike dies it is unable to start again and I have to wait about 10 to 20 seconds and then the bike starts fine...only sometimes though. Other times it will die and have no problem starting right away. After riding for 20+ minutes, however, I no longer have this problem and bike rides fine. I've ridden with the bike in PRI and ON on the petcock and that doesn't make a difference. I will say that if I leave the choke on I will not have this problem, however, the bike naturally will idle extremely high. I thoroughly went through the carbs and they look great. I've adjusted the pilot screw AT 1.5 turns, 2.5 turns, and even 3 full turns. Doesn't make a difference either way. Looked for vacuum leaks by spraying starter fluid around the boots. Nothing changed. Rode the bike with the gas cap off to check with bad ventilation. Nothing changed. I even tried bypassing the air cut off valve and that made the bike run worse. Any suggestions would be helpful.
Not sure if it's related but sometimes the turn signals work and sometimes they don't. Just wondering if there's some weird electrical thing going on here that might affect the idle. Thanks.



Login or Register to Remove Ads

Last edited by JGunn; 09-02-2018 at 05:00 PM.
JGunn is offline  
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.