2005 GZ Leak Starting problem leaks from cylinder near exhaust

bwader · 12-21-2017, 03:12 PM

Got it started and running!
I made sure I had spark again today and sprayed a good bit of starter fluid inside spark plug hole and it started up.

I rotated carburetor toward me to take off 4 screws at bottom and fuel Needle valve was stuck. (what ever its called) and carburetor was dry so I knew it was lack of fuel.
Primed and took a little while and I took this video. I will need to readjust the valves. Had at upper limits of range.

12-21-2017, 03:12 PM	#36
bwader Senior Member Join Date: Aug 2013 Location: Franklin VA Posts: 174	Finally Got it started and running! I made sure I had spark again today and sprayed a good bit of starter fluid inside spark plug hole and it started up. I rotated carburetor toward me to take off 4 screws at bottom and fuel Needle valve was stuck. (what ever its called) and carburetor was dry so I knew it was lack of fuel. Primed and took a little while and I took this video. I will need to readjust the valves. Had at upper limits of range. __________________ 2005 GZ 250 10,200 miles
	1