![]() |
#1 |
Junior Member
Join Date: Dec 2016
Posts: 10
|
starting
Hi guys , well I got this Suzuki marauder 250cc . It been sitting idle for 4 years. Had not run for a couple either. Anyway .....I was hoping since it looked clean and dry in the fuel tank it been stored well....got that wrong.....tried to fuel it and using a power pack to start it when a ton of fuel poured over the ground....so then plan b) undo the tank and clean it out ...and clean out air filter box and filter..... ..remove Carb from bike....then I notice the choke cable don't work its rusted solid and has squash kinks...also the throttle cable on one side is broken mid length...on the return side....open up the Carb.--.and the words oh my god does not cover it....petrol varnish ...rust ...everywhere.......so today was clean the Carb day ...used 1 litre of petrol and full 750ml can of Carb cleaner on it and in it...spent hours unclogging the jets ...the main speed jet 125 took the longest...every jet was solid gummed up. So with boiling water on the stove and cleaner and some small wire..followed by the air compressor...got all of them cleaned. What I could not get out was the needle housing retainer screw...and for some reason the jet with large nut would not come apart but every jet came out ..I blew it clean as I could . Removed fuel varnish etc...I could not get the top black plastic cover off...the screw just don't want to let go..so I am wondering if this will start ...even if I don't have functional choke....or throttle ...so I boosted the idle screw up a bit.....ready for a try ...also the mixture screw was out like 4 turns ...but I cleaned it and put it back as 3 turns,,,hoping this will allow start. Float height was good . Needle and seat work...every else got blown out and cleaned ...anything I missed for tomorrows start up try
![]() Login or Register to Remove Ads |
![]() |
![]() |
|
|