Carburetor Issue

AndrewLove · 06-03-2016, 08:07 PM

I recently bought a GZ250 as a project. It's a 2006 that hadn't run since 2007.

I've been through the carburetor about 5 times. It seems spotless. I've even replaces the float and have done a K&L Rebuild kit on the carb.

I also did a K&L Rebuild on the petcock. The Petcock seems to to be working correctly now. If I disconnect the fuel line from the tank and try to start it, fuel is delivered.

So the Bike starts strong about about 3 second later it starts to bog down. If I add throttle it dies immediately or about 5 seconds later if I don't apply throttle.

After that it won't start again for awhile.. Seems like it's flooding. I can't seem to figure it out.

Anyone have any ideas?

06-03-2016, 08:07 PM	#1
AndrewLove Junior Member Join Date: Apr 2016 Posts: 3	Carburetor Issue I recently bought a GZ250 as a project. It's a 2006 that hadn't run since 2007. I've been through the carburetor about 5 times. It seems spotless. I've even replaces the float and have done a K&L Rebuild kit on the carb. I also did a K&L Rebuild on the petcock. The Petcock seems to to be working correctly now. If I disconnect the fuel line from the tank and try to start it, fuel is delivered. So the Bike starts strong about about 3 second later it starts to bog down. If I add throttle it dies immediately or about 5 seconds later if I don't apply throttle. After that it won't start again for awhile.. Seems like it's flooding. I can't seem to figure it out. Anyone have any ideas? Login or Register to Remove Ads
	0