Newbie Question - Rear Brake

[Orpheus]

Originally Posted by Easy Rider

Close but no cigar. I don't think the nut on the cable is meant to be an adjustment. As the quote from the manual says, the switch itself is actually mounted inside a big plastic sleeve with a "nut" formed on the front end.

The plastic nut is what I was talking about; sorry if I wasn't clear. I'm going to go look at it right now.

Edit:

Okay, I just went and looked at it and there isn't a plastic nut, but rather the sleeve that you're talking about. You can see it on the left side of the spring in this (blurry) pic:



That's what triggers when the light comes on. I needed to adjust it when I got a new spring due to the original one breaking. I'm not sure if you'll have to unattach the spring, then adjust it a little, then reattach it and see when it triggers, or if you can turn it while it's attached; I forget what I had to do.