GZ125 electrical fault

sLeedham · 08-05-2015, 11:54 PM

I know this is supposed to be for 250's but from what I understand there is not a lot of difference between them.
I'm still new to bikes so sorry in advance if I come across as a little stupid.
I'd been having problems with my choke since I my bike back in November. Upon inspection I realised the cable was stuck so I installed a new one. I also moved my clutch cable as it was looping over the Speedo so I moved to to run under it.
When all was reassembled I went to start it up but when I turned the key to on nothing happened. No lights lit up. Headlight won't come on. Nothing electrical would work.
I've put the battery on charge just in case this was the problem but it is reading a bit over 11v when tested with multimeter.
I am hoping this is the problem but thought I could ask for any advice for if this is not the case.
Thanks in advance.

08-05-2015, 11:54 PM	#1
sLeedham Junior Member Join Date: Aug 2015 Location: Devon, England Posts: 6	GZ125 electrical fault I know this is supposed to be for 250's but from what I understand there is not a lot of difference between them. I'm still new to bikes so sorry in advance if I come across as a little stupid. I'd been having problems with my choke since I my bike back in November. Upon inspection I realised the cable was stuck so I installed a new one. I also moved my clutch cable as it was looping over the Speedo so I moved to to run under it. When all was reassembled I went to start it up but when I turned the key to on nothing happened. No lights lit up. Headlight won't come on. Nothing electrical would work. I've put the battery on charge just in case this was the problem but it is reading a bit over 11v when tested with multimeter. I am hoping this is the problem but thought I could ask for any advice for if this is not the case. Thanks in advance. Login or Register to Remove Ads
	0