Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-09-2012, 02:45 AM   #11
7653
Junior Member
 
Join Date: Feb 2011
Location: San Francisco
Posts: 23
Re: Need throttle to start up bike

Actions:
-Turned the idle knob .75 turn clockwise. After the idle speed knob was adjusted when there is no throttle at all the bike moves about 5-6 MPH. (I don't have a tachometer so I am describing the RPM of my bike through how fast/MPH it moves without any throttle at all instead.)
-Put one-fifth of a can of Seafoam into the gas tank and rode bike for about 40 miles total since then

Results:
-Bike does not stall during stops anymore. Bike idle is louder. -- probably due to increased idle speed
-Bike seems to run a little bit smoother now -- due to Seafoam or placebo effect?

Lack of Results:
-In order to fire up the bike I still need to put it on full choke and throttle before I even press the starter button
-When it is on full choke and throttle and I press the starter button I still sometimes have to hold the starter button for the length of a several "tuh tuh tuhs" and when I get off the starter button the bike has to quietly make a few "jug jug jug jug" sounds while my bike is on full throttle & choke before it will sound off with a loud RRRRREEEEVVVV.

Any ideas on what else can be done to fix the latter? What is the problem? Or should I just bring the bike to a mechanic?



Login or Register to Remove Ads
7653 is offline  
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:25 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.