new air filter set up

[Jvacustoms]

Originally Posted by jonathan180iq

I had stock exhaust and a pod air filter. I was good with a 122.5 or a 125, I don't recall 100%.
One shim on the needle and just a slight turn on idle screw. I was lucky to get it locked in so quick, but just didn't notice an improvement that would allow me to push the mod on the masses.

so the pod filter only took a gain of 5 in the main jet?

because i had 130 running perfect on my pipe and now not so much.

I will look for a 135 that should do the trick, I do think that the k&n style might bet more air flow than the pod type i saw in the other post. So i will go 5..

I don't know though I am thinking that I might just need 1 shim under the needle because right now the mix is at somewhere around 4. I had to make it rich to get it home and to work to see where it was really lacking. and i am convinced that it is the main jet and maybe an over-shimmed needle.