Start Up Problem

mrlmd1 · 10-26-2011, 03:15 PM

You do have gas in the bike right?
Do you know if it's getting to the carb?
Pull the fuel line off the carb or the bottom of the petcock, put it on PRIME and see if gas flows out.
If it does, put it on RUN and see if gas flows when you crank it, (but catch the gas in something or put another line on it into a container so you don't spill it all over the engine.).
Check to see if the vacuum hose is attached to the petcock to open the fuel flow or make sure the line is not cracked and leaking.

10-26-2011, 03:15 PM	#11
mrlmd1 Senior Member Join Date: Jan 2008 Location: Crawfordville, Florida Posts: 2,853	Re: Start Up Problem You do have gas in the bike right? Do you know if it's getting to the carb? Pull the fuel line off the carb or the bottom of the petcock, put it on PRIME and see if gas flows out. If it does, put it on RUN and see if gas flows when you crank it, (but catch the gas in something or put another line on it into a container so you don't spill it all over the engine.). Check to see if the vacuum hose is attached to the petcock to open the fuel flow or make sure the line is not cracked and leaking. Login or Register to Remove Ads
	0