Bar End Mirrors & Extra Rear Running Lights

[jonathan180iq]

The mirrors sit maybe one inch lower than the standard mirrors and hang over the end of the bars a little less than 1 inch. It took me a day to get them in the perfect position for viewing both behind me and out to the sides. The way I have them set up in these photos is not the way they sit today. They are just generic ATV mirrors but work in all 7/8 bars, obviously.

The tail lights are set up fairly simply, although it took me some extra time to figure it all out and work flawlessly. They are wired together and the power line is routed under the back seat and clipped into the BROWN line on the tail light wiring harness. This is the running line, the Black/White line is the brake line. If you wanted extra brake lights, you could splice in to that line.






All of these wires are covered by a fitted foam pad and out of view. They're ugly. I know. This is a first attempt here. I'll make 'em prettier later.





Sorry for the blur. It was dark and it's hard holding the camera still enough to get a clear shot.


Let me know what you think.