idling issues

blaine · 07-23-2011, 08:46 PM

2 1/2 turns out is a good starting point.With the bike at operating temperature,turn the screw slowly out till the idle starts to roll(rich).Than turn slowly back in till the idle starts to get slow(lean).About midway between both extremes is were you want to be.Were the bike idles smoothest.If you are going to be a few minutes,it helps to have a fan blowing air on the engine to keep from overheating.

:2tup:

07-23-2011, 08:46 PM	#11
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: idling issues 2 1/2 turns out is a good starting point.With the bike at operating temperature,turn the screw slowly out till the idle starts to roll(rich).Than turn slowly back in till the idle starts to get slow(lean).About midway between both extremes is were you want to be.Were the bike idles smoothest.If you are going to be a few minutes,it helps to have a fan blowing air on the engine to keep from overheating. :2tup: __________________ If at first you do succeed, try not to look surprised. Login or Register to Remove Ads
	0