Warmup

mrlmd1 · 07-12-2011, 10:01 AM

Like Blaine said - that white idle screw is used to set the idle ONCE, after the bike has fully warmed up, to 1200-1300 rpm, then don't touch it again. That is not an adjustment you make every day or every time you ride. You use the choke to start the bike and after 30 sec or so, ride off and turn it down as you go. That's normal operating procedure, for almost every bike that's not fuel injected. Why is that so hard for everyone to understand? Reading the owners manual might help.

07-12-2011, 10:01 AM	#11
mrlmd1 Senior Member Join Date: Jan 2008 Location: Crawfordville, Florida Posts: 2,853	Re: Warmup Like Blaine said - that white idle screw is used to set the idle ONCE, after the bike has fully warmed up, to 1200-1300 rpm, then don't touch it again. That is not an adjustment you make every day or every time you ride. You use the choke to start the bike and after 30 sec or so, ride off and turn it down as you go. That's normal operating procedure, for almost every bike that's not fuel injected. Why is that so hard for everyone to understand? Reading the owners manual might help. Login or Register to Remove Ads
	0