03-05-2011, 11:12 PM
|
#1 |
|
Member
Join Date: Jan 2011
Location: ontario, canada
Posts: 30
|
16 tooth sprocket surprise
i replaced the front sprocket today. when i looked at the lockwasher i found that it had been damaged . half of the splines were crushed as if the nut had been tightened with the washer misaligned. as it has less than one mile i will assume it happened at the factory.
i hammered it flat and refit it. i hope that's the only q.c. oversight. 
Login or Register to Remove Ads |
|
|
|
|
Threaded Mode